ZWave

With this Pack, Vera Edge + RFXtrx433E, you will be able to control wireless devices in addition to the Z-Wave protocol. The 433Mhz transceiver bridges Z-Wave between wireless devices from multiple brands.
You can find all supported brands here:

RFXtrx433E

Vera Edge

With this Pack, Vera Plus + RFXtrx433E, you will be able to control wireless devices in addition to the Z-Wave protocol. The 433Mhz transceiver bridges Z-Wave between wireless devices from multiple brands.
You can find all supported brands here:

RFXtrx433E

Vera Plus

With this Pack, Vera Secure + RFXtrx433E, you will be able to control wireless devices in addition to the Z-Wave protocol. The 433Mhz transceiver bridges Z-Wave between wireless devices from multiple brands.
You can find all supported brands here:

RFXtrx433E

Vera Secure

The Qubino RGBW Dimmer module controls RGB/RGBW LED stripes and bulbs and lets them shine in various colors. Therewith, you present your home in the right light. Beside 16 million selectable colors, you can use 5 already pre-defined scene effects (Ocean, Lightning, Rainbow, Snow and Sun).

The device is placed in a wall box right behind a RGB/GRBW switch. The switch is no longer directly connected to the light but acts as an input device for the Qubino module that is controlling the light. The Qubino RGBW Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Thanks to Z-Wave, you can control your light conveniently via smartphone and tablet-pc as well as automatically through intelligent sensors and time schedules. Therewith, you create not only good mood atmosphere, but also use colored light within safety scenes for optical alarms or presence simulation.

This module is used for dimming the light or to manage the speed of a fan.

Big range of bulb types
The first (MOSFET switching) dimmer module which also supports control of low voltage halogen lamps with electronic transformer, dimmable compact fluorescent light and dimmable LED bulbs. Qubino Flush dimmer supports also the classical incandescent lights, halogen lamps operated by 230 VAC (High Voltage Halogen), dimmable fluorescent lights and dimmable LED lights.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

Smarthome lighting & LED dimmer. Universal dimmer module with a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal.

Flush Dimmer 0-10V is a unique Z-Wave Plus product and truly one of a kind. It was researched and developed based on the end users and DIY (Do It Yourself) enthusiasts who were desperately looking for a Z-Wave solution with 0-10V input/output. A perfect LED dimmer.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This Z-Wave module is used for dimming the bulb or to manage the speed of a fan. The module can be controlled either through a Z-Wave network or through the wall switch.
The module is designed to be mounted inside an electrical cabinet onto DIN rail.

Module measures power consumption of bulb or fan and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This module is used for switching On or Off 2 electrical devices like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

With Qubino Flush Shutter close your shades when it gets too hot during the day. In winter, make sure they are open, so your home naturally gets warmer. Check and control your shades with a tap on your smartphone.
Is the scorching summer sun heating up your home making it unbearable? Would you rather let the sun do most of the work during the cold winter season?

Flush shutter DC module with inverting power polarity is used to control the 12-24VDC motor of blinds, rollers, shades, venetian blinds, windows, etc.

New functionality - support venetian blind slats tilting

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

With this module can feed your load with the desired voltage because it has a separate entrance for this purpose.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

The Qubino On/Off Thermostat 2 is your wireless heating and hot water controller that also measures the power consumption. This amazingly tiny module is ideal for wireless control of electric or water-based underfloor heating systems, electric water heaters, hot water pumps, and electric radiators.

5 x QUBINO insert modules of your choice:
ZWGOA ZMNHDD1 – Flush Dimmer Z-Wave Plus
ZWGOA ZMNHBD1 -Flush 2 Relays Z-Wave Plus
ZWGOA ZMNHAD1– Flush 1 Relay Z-Wave Plus
ZWGOA ZMNHCD1 - Flush Shutter Z-Wave Plus

Note: In the observation field please define the references and quantities of your choice.

This Z-Wave module is used for energy measurements in single-phase electrical power network till 65A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals.

The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network.

It is designed to be mounted on DIN rail.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

The Qubino three-phase smart meter can be used in many automation scenarios that make your life more comfortable. Smart Meter is an extremely versatile and powerful instrument for measuring energy in a three-phase power network up to 65A. A built-in microprocessor calculates the power, reactive power and power factor with the measured values. The smart meter is designed to be mounted on a DIN channel. The Qubino Smart Meter can be used in residential, industrial and commercial facilities. This equipment permanently measures the current and voltage in a three-phase network. Calculate the current and total power, the PHI power factor and the reactive energy that is actually consumed. The control through Z-Wave allows to act the relays (available separately), as well as to evaluate the results of the measurements of the device. With the energy data we can carry out the most varied actions, such as being alerted if the consumption exceeds a certain limit, sliding loads to keep the consumption below a certain level, etc.

to work with ZWGOA ZMNHTD1 Smart Meter
wired connection
Voltage: 230V ± 10%, 50-60Hz
Current: 32A, 2 pole

to work with ZWGOA ZMNHTD1 Smart Meter
Infra-red connection
Voltage: 230V ± 10%, 50-60Hz
Current: 32A, 4 pole

Temperature sensor can be installed inside this Wall mounted casing. The dimensions of the Wall mounted casing are 71mm x 71mm x 27mm. This casings are made from ABS material and are available in white colour.

Temperature sensor can be installed behind this 2M casing SET. It is suitable for mounting on boxes Ø60 with claws. SET consists of: 1 x cover plate1, 2 x 1M perforated blank cover and 1 x mounting frame 2M with claws. 2M casing SET is made of PC/ABS material and comes in 2M dimensions. 2M casing set is available in polar white colour.

Digital Temperature sensor has 1m cable with connector to connect directly to the different modules. The digital temperature sensor range is between -50°C and +125°C.

SPU-DIM-C02 can control single colour LED strips from a standard push switch or from a 0-10V or 1-10V from any manufacturer. The controller can be connected to one or more push switches (check wiring diagram) or with 0-10V or 1-10V signals

The Smart Switch 6 is an intelligent adapter plug which can be switched by mobile remote control, wall switch, smartphone or through automation. Thanks to Z-Wave the Smart Switch 6 is more than an ordinary socket. Plug it into any power outlet in your home and that outlet is instantly smarter because lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.
And because it’s truly smart, Smart Switch 6 offers much more than just wireless control.

Save on what you spend.
Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you know.

It does that via the Aeotec LED Ring. 16 million colours of light are used to visually communicate how much electricity is being used.

See what you spend.
Smart Switch 6 doesn’t just visually communicate how much electricity you’re using, it also reports it back to your Z-Wave gateway in real-time. From anywhere in the world you’ll be able to see which devices are turned on and how much that is costing you. Compatible gateways will also help you store and analyse your historical energy consumption. Besides a colored LED ring at the Smart Switch shows the energy consumption of the connected device.

The LED ring can be configured as follows:
• Disabled: The LED ring is switched off permanently
• Bicolored: Blue shows that the connected device is switched on, White shows that it is switched off
• 16 milion colors: Colors vary from Blue to Yellow, Green up to Red (Blue shows low, Red shows high energy consumption of the connected device)

The Smart Switch 6 has a dimension of only 60 x 60 mm and is therewith 43% smaller than its forerunner - however it is smart and practical. In a time when tablets, smartphones and many other devices can be charged with power via USB it is obvious that Smart Switch 6 owns an additional USB port alongside.

With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. Additionally, the ZW116 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

The AEOTEC Nano Dimmer is a flush-mounted radio module which turns a standard light installation into an intelligent smart home component with Z-Wave wireless technology.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls (switch/dim) the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside. The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch.

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Energy Illuminator Micro is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Micro Smart Energy Illuminator is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices.

With AEOTEC’s new and smart RGB bulb color comes into play. The Aeotec bulb fits into every E27 bulb holder and connects to a smart home center through Z-Wave wireless technology. It is able to vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes.
The bulb uses 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes confer light temperature of 2580-7050K on the LED bulb.

• Cold white: 4745K to 7050K;
• Natural white: 3710K to 4745 K;
• Warm white: 2580K to 3710K ;

Well-known manufacturers such as Samsung and Philips also use the same LED technology.
An additional row with diodes gives Aeotec’s bulb the opportunity to vary between 16 million colors.
Furthermore the bulb can be switched on and off time-controlled via defined scenes or by a motion sensor. Use your Aeotec bulb as notification or status LED. Installed in the corridor it could flash in red color if you want to leave your home and windows or terrace door are still open. Due to LED technology power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W.

Smarter. Safest. Smaller still. Plug it. Automate it. Control it. Understand how much electricity you are spending. Smart Switch 7 is Aeotec's smallest smart plug and is also everyone's safest.

Intelligence is in control. Appliances turn on when needed and off when not. On a schedule. Or intelligently automated and triggered when needed. You are completely in control. It is smart because it can be automated. But it's also a smart plug because the power to turn it on or off manually is always yours.

In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend. Furthermore the Smart Switch 7 is one of the best in design and quality. European design, German engineering and SGS certfication make Smart Switch 7 the smallest and safest smart plug.

Recessed Door Sensor is a new small and compact Z-Wave sensor with the size of 2.5*7 cm (main body), that tells you and your Z-Wave network if a door is open or closed. It is nearly invisible, as the sensor is installed with the help of a slight drill hole hidden away on the top of your door. Installing Recessed Door Sensor is easy, as you only have to add it to your home’s network activating its battery and associating it with your Z-Wave system.

Motion for security. Motion for presence. Motion for management. The Aeotec MultiSensor 7 motion sensor is perfect for more than just an intelligent security system. With a 10 metre range and a 120° field of view, MultiSensor 7 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 7 makes your home automation system more powerful and more intelligent.

Z-Wave Aeon Labs Multisensor 6 - Gen5
AEOEZW100
ZW100

Make your home really intelligent. One tiny device packed full of intelligence. A smart home is only truly smart when it’s intelligent. A smart home has to offer more than a schedule; it has to react to what’s occurring in a home in real-time. MultiSensor 6 is the foundation of a modern smart home; within its perfectly small exterior lies all the technology for real-time intelligence. It can detect movement, vibration and measure the temperature, luminosity, air humidity and UV radiation.

With the ceiling mount called "Recessor" you can integrate the Aeotec multi sensor into the ceiling - almost invisible and effective. Analogous to integrated ceiling lamps the sensor disappears almost complete in the ceiling. Simultaneously the detection area for the multi sensor (i.a. motion and light intensity) is enlarged.

Description Every Z-Wave Smart Home depends on data for truly intelligent automation; automation that makes a Smart Home actually smart, responsive and secure. The Aeotec TriSensor provides your Smart Home with its most essential data. 3 different sensors are crafted into Aeotec TriSensor’s impossibly small finish. A motion sensor to monitor a room’s occupancy, a temperature sensor to manage its environment, and a light intensity sensor to manage connected lighting. At only 1.77 inches in size and weighing only 50 grams, Aeotec TriSensor is really small. That means it can be placed almost anywhere in your home. TriSensor offers 4 different installation possibilities: in the corner, on a shelf, beam or in the Aeotec Recessor. Features Motion Sensor The sensor detects motion in up to 7.5 meters distance. It can also be adjusted and calibrated to it needs, e.g. to avoid an alarm by a pet. Temperature The temperature sensor is accurate and detects temperatures in the range from -10°C to 50°C (+/- 1°C). The temperature can be used in connection with heating device. Furthermore the Aeotec TriSensor can control a directly associated device, if the temperature goes above a configured level. Light Measure the light intensity from 0 - 30000 Lux and automate your ambient light in depending on the daylight.

Many people protect their home in different ways with smoke sensors, door locks and secrurity systems. But the dangers which are coursed by water mostly the people underestimate.

With the Water Sensor 6 of Aeotec your are secured of water damages perfectly. The unvinsible sensor detects minuscule amounts of liquids which can be caused by a little leak in the water pipe. An overflooding bath tub or sink doesn't cause hugh damages because the sensor can sends an alert before it is too late.

In combination with other devices in your Z-Wave network you can turn off electrical devices, close water valves or turn on pumps.

By the compact form of the Water Sensor 6 it is possible to place it nearly everywhere you want. Furthermore it contains addionally a vibration sensor which detects tamper and emergency events as well as a temperatur sensor.

With the Water Sensor 6 of Aeotec you are protected against water damages. This device is already greatful but with the Water Sensor Dock it becomes more greatful.

The installation of the dock offers several advantages to you.

Firstly you have got the opportunity to monitor two different areas in a distance of 1m from the water sensor. Connect the two spot sensors to the dock and then you can monitor separate areas. So you enlarge also the level of secrurity.

Secondly you can use the dock as loading station of the water sensor to power it with mains electricity. Connect the provided USB cable to the dock and the Water Sensor 6 does not longer need the batteries.

The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor. Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.

Run your smart home locally, privately, and cloud-free. Aeotec Z-Stick 7 lets you build your own automation gateway using Gen7 and 700 series Z-Wave technologies.
Brimming with new features and technology, yet wholly more compact. Z-Stick 7 is 79% smaller than Z-Stick Gen5+ and yet it is still just as easy to setup.

With the new Z-Wave USB Stick Generation 5 by Aeon Labs your PC, notebook, Barebone, Raspberry Pi etc. change into a central controller of your smart home.

The control of the Z-Wave network is realized via "Z-Wave Serial API" (according to "Z-Wave Application Programmers Guide, INS10247"). It‘s also used by well-known Z-Wave control programs such as IP Symcon, Homeseer etc. This allows you to use the USB stick GEN5 universal with other Z-Wave software solutions. Thanks to the integrated battery, you can also include or exclude any devices in your Z-Wave network by pushing on the local button, when PC or Notebook is turned off.

Aeotec's WallMote is a remote control, wall switch and Z-Wave controller, all-in-one. This device can manage its own Z-Wave network (if included as a primary controller) and can control other devices such as sockets, blinds, dimmers, lights, electronic locks and many more. Obviously, it can also be integrated into a Z-Wave network as a secondary controller. WallMote is the perfect Z-Wave controller. Wireless, battery powered, but capable of controlling hundreds of devices in more than a dozen Z-Wave scenarios.

Pack of 2 x Aeotec’s Z-Wave Plus repeater and range extender.

Aeotec’s Z-Wave Plus repeater and range extender.

Z-Wave makes your home smarter. The Aeotec Doorbell 6 also makes your entrance area smarter. By combining visual (1000lm) and audible (110dB) alarms, you'll be notified when someone is at your door. You can also connect the Aeotec Doorbell 6 to automated scenes and, for example, turn on the lights in the hallway when it is dark. Why don't you use your Doorbell as a siren? Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. In combination with various sensors, you are fully protected. By the way you can also use the Aeotec Doorbell 6 without Z-Wave.

With the Aeotec NanoMote you control devices and scenes in your intelligent home easily and intuitively - on the wall and in your hand - with one or four buttons.

The NanoMote Quad from Aeotec is a stationary 4-button wall switch as well as a portable remote control, which can be integrated into an existing Z-Wave network as a secondary controller for wireless control of devices and scenes.

The Aeotec NanoMote sends commands to the Z-Wave gateway and controls electronic devices, shutters and blinds or lamps. The Aeotec NanoMote Quad controls up to 15 automated scenes.


The battery-operated device can be wall mounted or used as a portable remote control. It can also be used as a pendant on your key ring or car key. In order to avoid unintentional triggering, the Aeotec NanoMote has a locking function which is triggered by a predefined combination of keystrokes.

The Aeotec Siren 6 makes your home smarter and safer. The Aeotec Siren 6 enriches your Smart Home with a further safety factor. In combination with other Z-Wave devices, the visually appealing alarm siren warns of various situations with acoustic (110db) and visual signals. Whether water escapes in the cellar, smoke develops in the kitchen or an open door at night, the siren draws your attention to all these conspicuous features. You can also use the siren as a doorbell in addition to the alarm functions. The Aeotec Siren 6 plays 30 different tones, which are defined via parameters in the gateway. In summary, this device works particularly well for any type of acoustic and visual alarm in your Smart Home. The power supply of the Aeotec Siren 6 works easily via a power socket or battery operated. Due to its high-quality design, the siren fits well into your rooms and is hardly noticed.

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone. Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house.
The main body is anchored using a back mount. The device has three clamps and reports W, kWH, V and A (up to 60 Ampere).

The Aeon Labs Smart Energy Monitor is a low-cost energy monitor for the entire home. It can wirelessly report immediate wattage and kWh usage to central control point gateways and can be easily and safely installed by anyone.
Ease and safety are paramount: Electricians are not required to install the Aeon Labs Smart Energy Monitor; the customer never needs to handle hot exposed wiring. Current transformer clamps clamp around the AC Mains to detect energy usage for the entire house. The main body is anchored using a back mount which opens to easily. The device reports W and kWH.

One look and you are home. With the Aeotec Cam 360, you get a 360 degree view of your room at a glance. Display a detailed view of what's going on at home at day or night. Communicate through 2-way audio and a built-in microphone via the SmartThings App. Receive alerts when motion or sound is detected. Customize detection zone to pay closer attention to specific areas for unexpected activity. Use SmartThings App to automate scenes and routines with compatible smart devices.

Aeotec Nano Dimmer Bypass for use with Aeotec Nano Dimmer has been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

The Philio Insert Switch allows controlling two independent loads both wirelessly via Z-Wave and locally utilizing a traditional wall switch. Thanks to its calibration technology the PAN06 cannot only be used to switch AC devices ON and OFF, it also works perfectly with many kind of light, e.g. incandescent, fluorescent and LEDs.
In addition to this, the PAN06 can be connected to 12V/DC, which makes it possible to switch 12V MR-16 light as well.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the insert that is controlling the load.
This device is designed for a 3 wire system and needs a neutral wire in the wall box.

Heatit Z-TRM3 is an electronic thermostat for electrical floor heating, designed to be mounted in a standard flush box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems. Heatit Z-TRM3 has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On startup all the devices will automatically be included in the gateway (requires SmartStart compability). This saves the installer a lot of work.

Art. 54 305 99

This in-wall dual relay switch module is a transceiver which is a Z-Wave Plus enabled device and is fully compatible with any Z-Wave enabled network.Mini size design let the module can easily hide itself into the wall box and that will be good for the house decoration. There are many kind of application by using the module to switch AC power On and Off, one main application is the light control. The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of light like incandescent, fluorescent and LED light.This in-wall switch module is able to detect Instant power wattage and overload current (7.5A) of connected light or appliances. When detecting overload state, the Module will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, disconnect and re-connect the Module will reset its overload condition to normal status.

The Philio Roller Shutter Controller insert allows controlling motors for jalousies and blinds both via Z-Wave wirelessly and locally utilizing a traditional wall switch.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load.
This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.

Transform any home into a smart home with the Philio PAD02 Z-Wave Smart Dimmer Socket. The dimmer socket can be easily adapted to your current lighting devices, uses your existing lamp (E27 socket), and provides Z-Wave wireless and with remote control of overhead lighting. Use the dimmer feature to customize the lighting output and create the perfect ambiance for any room. Providing ultimate flexibility, the Philio Z-Wave Smart Dimmer Socket allows you to operate the lighting by itself or easily integrate the socket with two-way, three-way or four-way wiring configurations by adding the Philio Smart Switch Modules for Z-Wave. Take control of your home lighting with Philio Z-Wave Smart Lighting Controls!
Easily adapt to any standard lamp E27 socket with the Philio Z-Wave Smart Dimmer Socket to turn lighting on/off or adjust dim levels with your mobile device or computer using any Z-Wave certified gateway. Can be controlled in groups of multiple lights or used to create dimmable ambient interior lighting scenes.

Heatit Z-Temp2 is a temperature sensor designed for use with waterbased heating systems. Using it in combination with the Heatit Z-Water regulator allows for an advanced waterbased heating solution that can be managed from a Z-Wave gateway.
This is a “wire-free” solution, saving both time and money. All communication between the Heatit Z-Temp2 and the controlled device is 100% wireless. Heatit Z-Temp2 has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On startup all the devices will automatically be included in the gateway (requires SmartStart compability). This saves the installer a lot of work.

art. 45 126 66

The Z-Wave 3 in 1 sensor (PHI_PSM01) is designed with three detection sensors:

• Door/windows;
• Temperature sensor;
• Luminosity sensor.

The sensor consists of two parts; a Detector and a Magnet. They are designed to be fitted to doors or windows with the Magnet mounted on the opening part and the Detector mounted on the fixed frame. Opening the protected door/window will remove the magnetic field, trigger the detector and generate an alarm condition, (if the system is armed). The sensor can also applied to automatic light control, one scenario is to get the illumination lux level from built in illumination sensors and send a signal to Z-wave switch to turn the light on once we open the door when the room is dark.
Every time when Door/Window trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes. Note: The illumination sensor yet does not work with Fibaro Homecenter 2 and Zipato Zipabox.

The Z-Wave 3 in 1 sensor (ZWphiPST02-1B) is designed with three detection sensors:

• PIR/Motion;
• Temperature sensor;
• Luminosity sensor.

The detector can be used as a security device or home automation device. When the detector is cooperated with security appliances, the detector is acting as a security device by detecting changes in infra-red radiation levels. If a person moves within or across the devices field of vision, a trigger radio signal will be transmitted to cause full alarm condition in order to frighten intruders away. Alternatively, when the detector is worked with Z-Wave Controller, the detector can be set to perform the role of home automation device by detecting both changes in infra-red radiation levels and percentage of lux levels.
Every time when PIR trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes. Note: The illumination sensor does not work with Fibaro Homecenter 2 and Zipabox yet.

The Z-Wave 4 in 1 sensor (ZWphiPST02-1A) is designed with three detection sensors:

• Door/window sensor;
• PIR/Motion;
• Temperature sensor;
• Luminosity sensor.

Thanks to this the PSM02 can be uses as a security device or home automation device, e.g. to send an alarm when a motion is detected, turn the light on/ off automatically at night or to adjust the heater.
The product consists of two elements - the detector and the magnet. The magnet is mounted on the moving part of the window or of the door. The other part is placed on the frame.
Note: The illumination sensor does not work with Fibaro Homecenter 2 and Zipabox yet.

Zipato Flood Multisensor 3 in 1 integrates flood, temperature and humidity sensors in one device. Zipato Flood Multisensor 3 in 1 offers elaborate security and ambient sensing options. Multifunctional nature of this product allows you to informed about water leakages and potential flood disasters, as well as to measure temperature and humidity levels. When used with Zipato home automation controllers it can be part of any automation scenario created using Zipato Rule Creator. Accordingly it can be used to automatically trigger other Z-Wave devices when activated.

The new Philio Motion Detector in small ball design detects movements at a distance of up to 12 meters. The sensor can be easily installed on the ceiling or a wall thanks to a supplied magnetic holder. Thanks to the unique and descretely design, you can place the sensor anywhere to automate your light. Then your light switches on only when the movement is detected, and if there is no person in the room, the lamps are not switched on.

The sensor also includes a lens cover. With the cover, you can hide an area which is not to be detected by the motion detector.

In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.

The compact sensor in ball design recognizes motion in a distance up to 12 meters and can be installed quite easily and individually at ceilings or walls.
This allows you to place the sensor descretely next to your lighting and automate your lights.

In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.

The compact sensor in ball design recognizes motion in a distance up to 12 meters and can be installed quite easily and individually at ceilings or walls.
This allows you to place the sensor descretely next to your lighting and automate your lights.

In addition, the sensor is suitable for outdoor use. This allows you to extend your automation and alarm system to the outside. The sensor is battery operated and can be easily added to your Z-Wave Smart Home System.

The Philio Round Recessor is made to mount motion sensors on the ceiling. The Fibaro motion sensor and the Philio outdoor motion sensor fit perfectly into the brackets. So the motion sensor is installed in the right position and through a firm and reliable attachment.

The Philio Square Recessor is made to mount motion sensors on the ceiling. The Fibaro motion sensor and the Philio outdoor motion sensor fit perfectly into the brackets. So the motion sensor is installed in the right position and through a firm and reliable attachment.

Philio’s „Smart Color Button“ is a real multi-talent. Use it as a remote control or switch your devices on and off. Turning right or left changes room temperature, drives shutters up and down or dims the light. The smart button gives a feedback to the last action with its colored LED ring.

Put your Philio Color Button to the refrigerator or heaters. Its backside is magnetic and sticks on metallic surfaces.

The Color Button can be connected to all relevant Z-Wave gateways (as secondary controller) and controls all devices within your intelligent Z-Wave network.

The Philio Smart Keypad with an elegant glass touch panel can be included in your Z-Wave network to increase the security in your home. The smart device support Z-Wave Multi-Functions Smart Switch to report the current key status and setup Arm/ Disarm.

Valid for the references: ZWPHI PAN08 - Z-Wave Plus Relay Insert Blind ZWPHI PAN06 - Z-Wave Plus 2 Relays Insert Refer in the observations field the desired quantities and references.

Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. The module clips right onto a DIN-rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/digital inputs. The module is power supplied from a 230V AC mains connection and is able to deliver an output supply of 24V DC or 230V.

Heatit Z-Water relay outputs may be freely controlled from the Z-Wave network, and may be used for several purposes, e.g. on/ off control of lights, controlling valve actuators in an underfloor heating system, or controlling other home automation systems.

Heatit Z-Water analog/digital inputs (different firmware versions) may be configured to work with different functionalities. They may be connected to potential free contacts, opencollector outputs, and may also control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs may be used as scene controllers and send central scene notifications to the Z-Wave primary controller (via digital inputs only).

Heatit Z-DIN 616 is a 6 x 16A potential free relays for DIN rail mounting. The module is equipped with 6 relay switches and 6 digital inputs for mounting on a standard M36 DIN rail (EN50022).

The 6 independent relay switches of the Heatit Z-DIN 616 can be freely controlled from the Z-Wave network and be used for many different purposes. All 6 relay switches are galvanically isolated from each other and may be used for controlling AC and/or DC loads. Each relay switch is rated for loads of up to a maximum of 16A.

The 6 digital inputs can be connected to dry contacts, e.g. limit switches, door/window contacts, or push-buttons. Another option is to connect them to open-collector outputs from discrete sensors, e.g. PIR sensors. The 6 inputs of the Heatit Z-DIN 616 may also function as a scene controller and activate predefined scenes in other Z-Wave devices or controllers (by transmitting Central Scene notifications).

The Heatit Z-DIN 616 is powered by a 10 – 24Vdc power supply. Initiation of Z-Wave inclusion and exclusion is executed by activating a push-button through a little hole in the front of the module. The Heatit Z-DIN 616 is equipped with a LED in the front of the module for different kinds of status indications.

Heatit Z-Relay multipurpose relay module can be used for many different applications. The IP 55 rated casing makes it useful for any outdoor application. Can pull loads up to 16A and 25A. The relay has three inputs: analog or digital. You can use both analog and digital inputs, or a combination.

Heatit Z-Relay is a multipurpose product and can be used for the following applications:
• Boiler control
• Leakage control
• Temperature control
• Outdoor applications
The relay has 3 analog/digital inputs and can be used with a lot of different sensors and meters, from water meter pulse sensors to NTC temperature sensors.
The relay comes in two different versions, 16A and 25A. They both have firmware updates (OTA), power metering and S2 security.
We are able to make special firmware if a customer has a special requirement.

Heatit Z-Dim is a Z-Wave rotary dimmer for many different types of light sources. The Heatit Z-Dim works on low loads without causing the lights to flicker. It dims LED-bulbs from 1-200VA, 230V halogen and incandescent bulbs, dimmable LED-drivers and electronic transformers. The dimmer is not affected by start-up inrush currents. L+N leads must be connected.

The dimmer is equipped with a multiway switching option. This allows you to light and dim a light source from one dimmer, and later turn it off with another one. Very practical for stairwells, long hallways, etc.

The dimmer fits into standard Elko, Schneider Exxact and System 55 frame systems.

ART: 14 444 44

Heatit Z-Wave Gateway is a smart home control unit with a modern design. Heatit Z-Gateway has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On start-up all the devices will automatically be included in the gateway. This saves the installer a lot of work.

This gateway allows you to control all Z-Wave devices in your home via tablet or mobile phone. The gateway is designed for easy setup and operation. With just a few clicks, you can easily add Z-Wave devices and create scenes. The settings are simple, but the possibilities are almost limitless.

Push notifications are supported, so you get notifications from your phone when an event is triggered in the smart home system, even when the phone is in sleep mode.

Voice control via Amazon Alexa and Google Home is also supported, and you can manage the system through voice commands. The gateway has support for IFTTT, which makes it possible to integrate the gateway with almost any smart device on the market, as long as they have IFTTT support.

The Heatit Z-Wave gateway gives you endless opportunities to tailor your smart home to your specific needs.

Heatit Z-Push Button Heatit Z-Push Button is a battery operated wall switch with 2, 4 or 8 push-buttons. The switch enables you to control the Z-Wave products in your smart home system. Managing your Z-Wave products becomes easy and practical. The switch can be set up to control scenarios or work in associations with other Z-Wave products

Heatit Z-Push Button can control 1, 2 or 4 associations group with up to 5, 10 or 20 products or 4, 8 or 16 scenarios through your gateway. Heatit Z-Push Button 2 may not be used as a stand-alone unit; it must be included in a gateway to function.

The switch fits into standard Elko, Schneider Exxact and System 55 frames.

The switch is easy to install, and may be fastened with screws or double-sided tape.

With the optional usable cable you can update Heat-it thermostats' software and firmware.

The Floor Sensor is ideal suited to measure soil temperature – especially when using a floor heating – and reporting to the Heat-it thermostat. Therefor the sensor can be laid in empty conduits and set into the ground.

NTC 10 kOhm @ 25°C
Cable length: 3 meters

The danalock V3 evolution is based on the feedback from devoted customers and the latest development in data security and smart home technology.
Smaller, stronger and easier to install the V3 takes the lead on the smartlock market and is setting new standards for years to come.

Setting New Standards:
Twice the power;
Four times faster;
Smarter, smaller and safer;
Auto calibration procedure;
Lock Status;

The danalock V3 evolution is based on the feedback from devoted customers and the latest development in data security and smart home technology.
Smaller, stronger and easier to install the V3 takes the lead on the smartlock market and is setting new standards for years to come.

Setting New Standards:
Twice the power;
Four times faster;
Smarter, smaller and safer;
Auto calibration procedure;
Lock Status;

The danalock V3 evolution is based on the feedback from devoted customers and the latest development in data security and smart home technology.
Smaller, stronger and easier to install the V3 takes the lead on the smartlock market and is setting new standards for years to come.

Setting New Standards:
Twice the power;
Four times faster;
Smarter, smaller and safer;
Auto calibration procedure;
Lock Status;

The Danapad compatible with the Danalock V3, offers a secure access solution, easy to install and does not require a permanent modification of your door or entrance area. Simply install it within the Bluetooth range of your Danalock smart lock.

Operate Your Danalock from Anywhere! Connect your Danalock V3 smart lock to the Danabridge V3 and control and operate your Danalock from anywhere. Enjoy the added convenience of letting family members, friends and home service providers in – even when you’re not at home.

With the Danalock universal module you can conveniently control your garage door and motor-driven doors through your smartphone. The module has a relay to toggle a potential-free contact. The supply voltage can be output for a certain time (1-180 seconds) or permanent.

With the Danalock universal module you can conveniently control your garage door and motor-driven doors through your smartphone. The module has a relay to toggle a potential-free contact. The supply voltage can be output for a certain time (1-180 seconds) or permanent.

12 / 24V to 3V converter to operate the Universal Module V1.

This door cylinder (26 mm inward) can be put together in a modular way to the according length enabling the assembly of the electric door lock Danalock (oval, square, V125 or V3).
Scope of delivery contains all needed modules for the following lengths:
- 35mm (Base without module)
- 42mm
- 45mm
- 50mm

The profile cylinder package also contains keys as well as all needed screws for assembly.

Danalock adapter that allows you to use the original cylinder with the Danalock lock. The original cylinder must be anti-panic (able to open from the outside with a key inserted inside). You will need to saw one of the keys from the original lock.

The MH-S411 is a glass-surface wireless actuator able to to switch 1 load up to 1100 W. It is designed for application in round Pattress boxes (according to PT, ES, DE, etc Standard).

Beside local switching the device can be used to control two groups of directly associated devices or scenes stored in the central controller.

A blue LED on the button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.

The MH-S412 is a glass-surface wireless actuator able to to switch 2 separate oads up to 1100 W. It is designed for application in round Pattress boxes (according to PT, ES, DE, etc Standard).

Beside local switching the device can be used to control two groups of directly associated devices or scenes stored in the central controller.

A blue LED on every button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.

The MH-S314 is a glass-surface wireless actuator able to to switch 4 separate oads up to 1100 W. It is designed for application in UK Pattress boxes (according to British Standard).

Beside local switching the device can be used to control four groups of directly associated devices or scenes stored in the central controller.

A blue LED on every button indicates the switching status. The installation of the device requires a 3 wire system with neutral wire.

The MH-C421 rolling shutter switch is a Z-Wave wall switch with a sleek design and excellent performance. The switch can be used to cable a rolling shutter controlled by an alternating current engine (with end stop).
This product can be included and used in any Z-Wave network with other Z-Wave certified devices from any other manufacturer.
The switch is also equipped with an LED light that indicates its condition, and also functions as a repeater in a Z-Wave network.

Dimmer Switch is a wall panel built-in with Z-Wave Plus module.
With its stylish design and stable performance, the panel can be used to control the light level.
It supports basic command class，multi channel command class and multi channel association command class, also works as a repeater in a Z-Wave network.
This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

MCOHome CO2 Monitor is an air quality detector which compatible with Z-Wave technology, it is mainly used to monitor CO2 concentration in industrial, agricultural, and residence environment, while monitoring the indoor temperature and humidity. Device can be included into any Z-Wave network, and is compatible with any other Z-Wave certified devices.

MCOHome PM2.5 Monitor is an air quality detector which compatible with Z-Wave technology, it is mainly used to monitor PM2.5 concentration in industrial, agricultural, and residence environment, while monitoring the indoor temperature and humidity. Device can be included into any Z-Wave network, and is compatible with any other Z-Wave certified devices.

MCOHome A8-9 is a Z-Wave enabled multiple environmental monitoring sensors, with 3.5 inchTFT clear display and compliant to Z-Wave Plus standard.
It is built in with Temperature, Humidity,PM2.5, CO2, VOC, PIR, illumination, Noise, Smoke sensors.

the device can be included into any Z-Wave network, and is compatible with any other Z-Wave certified devices.