Heatit Z-TRM3 is equipped with a single pole switch and fits into System 55 frames. The thermostat can withstand a load of max 16A /3600W at 230V. At higher loads the thermostat must control a contactor. The thermostat may be connected to two wired external sensors. The thermostat has the capacity of up to 8 associations (relays, wall plugs etc.).
The thermostat is designed for electrical heating. It may be used for waterbased heating if the thermostat is linked with the Heatit Z-Water.
• Floor sensor• Internal room sensor• External room sensor (connected by cable)• Temperature limiter• SmartStart• Weekly program/ setback via gateway• Temperature read out in gateway• Firmware update (OTA)• Power metering• Relay status LED• Single pole switch• Lock mode/child lock• Calibration• 8 associations• Supports encryption mode: S0, S2 Authenticated Class, S2 Unauthenticated Class
This product is a security-enabled Z-Wave Plus product with encryption. The product must be used with a security-enabled Z-Wave Controller in order to fully utilize the product
TECHNICAL DATA
Acessories:
