ON/OFF Micromodule with energy metering

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

Availability: In stock

Manufacturer: Aeotec

SKU: ZWaeoMSES

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Overview
Reviews
Contact Us

TechInfo:

Low-cost Z-Wave energy meter and on/off appliance switch
On/Off control via Z-Wave, manual Wall Switch and/or built-in button
Small form factor that fit in most gang boxes worldwide
Input: 110V 60Hz and 230V 50Hz input
Output: 10A maximum output
Radio frequency: 868.42MHz (EU); Transmitting Power: 0 dBm; Range: 15 meters
Status Indicator: LED
Operating Temperature: 0-40 Celcius, Operating Humidity: 95%
Dimensions: (52x49x18.5mm)

Send us a message

Your name *

Your email *

Subject: *

Enquiry *

TechInfo:

Low-cost Z-Wave energy meter and on/off appliance switch
On/Off control via Z-Wave, manual Wall Switch and/or built-in button
Small form factor that fit in most gang boxes worldwide
Input: 110V 60Hz and 230V 50Hz input
Output: 10A maximum output
Radio frequency: 868.42MHz (EU); Transmitting Power: 0 dBm; Range: 15 meters
Status Indicator: LED
Operating Temperature: 0-40 Celcius, Operating Humidity: 95%
Dimensions: (52x49x18.5mm)

Customers who bought this item also bought

Dual Nano Switch with Energy Meter

ZWAEO ZW132

With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

SmartThings Hub V3

GP-AEOHUBV3EU

The SmartThings Hub V3 is the central connection and acts like the intelligent brain of your modern Smart Home. It allows you to connect wirelessly to a wide range of smart devices.
The associated SmartThings App on your Smartphone becomes the basic control center. The hub connects to your router via Wi-Fi or the included LAN cable and is ready to go in no time.

Note from Smarthings and Aeotec/Z-Wave Europe:
"The former Samsung SmartThings Hub has only changed its name. Technically it is the same product.
There is just a change in branding of this product. Now it is called “Aeotec Smart Home Hub - Works as a SmartThings Hub”.

Based on a worldwide agreement between Samsung and Z-Wave Europe, Z-Wave Europe GmbH is the SmartThings sales channel for the “Works with SmartThings Hub” and other SmartThings components.
Therefore, Samsung points customers and prospects to Z-Wave Europe, when they ask for the SmartThings Hub. Of course the user has access to the very large Smart Home Ecosystem, which is based on the SmartThings App."