Qubino

The Qubino RGBW Dimmer module controls RGB/RGBW LED stripes and bulbs and lets them shine in various colors. Therewith, you present your home in the right light. Beside 16 million selectable colors, you can use 5 already pre-defined scene effects (Ocean, Lightning, Rainbow, Snow and Sun).

The device is placed in a wall box right behind a RGB/GRBW switch. The switch is no longer directly connected to the light but acts as an input device for the Qubino module that is controlling the light. The Qubino RGBW Dimmer module occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box.

Thanks to Z-Wave, you can control your light conveniently via smartphone and tablet-pc as well as automatically through intelligent sensors and time schedules. Therewith, you create not only good mood atmosphere, but also use colored light within safety scenes for optical alarms or presence simulation.

This module is used for dimming the light or to manage the speed of a fan.

Big range of bulb types
The first (MOSFET switching) dimmer module which also supports control of low voltage halogen lamps with electronic transformer, dimmable compact fluorescent light and dimmable LED bulbs. Qubino Flush dimmer supports also the classical incandescent lights, halogen lamps operated by 230 VAC (High Voltage Halogen), dimmable fluorescent lights and dimmable LED lights.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

Smarthome lighting & LED dimmer. Universal dimmer module with a standard 0-10V output and a multi-function input, which may be a push button / switch, a potentiometer or 0-10V signal.

Flush Dimmer 0-10V is a unique Z-Wave Plus product and truly one of a kind. It was researched and developed based on the end users and DIY (Do It Yourself) enthusiasts who were desperately looking for a Z-Wave solution with 0-10V input/output. A perfect LED dimmer.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This Z-Wave module is used for dimming the bulb or to manage the speed of a fan. The module can be controlled either through a Z-Wave network or through the wall switch.
The module is designed to be mounted inside an electrical cabinet onto DIN rail.

Module measures power consumption of bulb or fan and supports connection of digital temperature sensor. It is designed to act as repeater in order to improve range and stability of Z-wave network.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This module is used for switching On or Off 2 electrical devices like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

With Qubino Flush Shutter close your shades when it gets too hot during the day. In winter, make sure they are open, so your home naturally gets warmer. Check and control your shades with a tap on your smartphone.
Is the scorching summer sun heating up your home making it unbearable? Would you rather let the sun do most of the work during the cold winter season?

Flush shutter DC module with inverting power polarity is used to control the 12-24VDC motor of blinds, rollers, shades, venetian blinds, windows, etc.

New functionality - support venetian blind slats tilting

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

This module is used for switching On or Off 1 electrical device like light, fan, oven, washing machine, iron, power socket, garage door, electric radiator, water heater, etc.

With this module can feed your load with the desired voltage because it has a separate entrance for this purpose.
item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

The Qubino On/Off Thermostat 2 is your wireless heating and hot water controller that also measures the power consumption. This amazingly tiny module is ideal for wireless control of electric or water-based underfloor heating systems, electric water heaters, hot water pumps, and electric radiators.

5 x QUBINO insert modules of your choice:
ZWGOA ZMNHDD1 – Flush Dimmer Z-Wave Plus
ZWGOA ZMNHBD1 -Flush 2 Relays Z-Wave Plus
ZWGOA ZMNHAD1– Flush 1 Relay Z-Wave Plus
ZWGOA ZMNHCD1 - Flush Shutter Z-Wave Plus

Note: In the observation field please define the references and quantities of your choice.

This Z-Wave module is used for energy measurements in single-phase electrical power network till 65A. Meters measure energy directly in 2-wire networks according to the principle of fast sampling of voltage and current signals. A built-in microprocessor calculates energy, power and power factor from the measured signals.

The module can be controlled through Z-wave network and it acts as repeater in order to improve range and stability of Z-wave network.

It is designed to be mounted on DIN rail.

item also available in:
908.4 MHz - USA/Canada, México, Chile
921,40 MHz - Australia, Brazil, New Zealand
Contact for details on minimal quantities and deadlines for these frequencies

The Qubino three-phase smart meter can be used in many automation scenarios that make your life more comfortable. Smart Meter is an extremely versatile and powerful instrument for measuring energy in a three-phase power network up to 65A. A built-in microprocessor calculates the power, reactive power and power factor with the measured values. The smart meter is designed to be mounted on a DIN channel. The Qubino Smart Meter can be used in residential, industrial and commercial facilities. This equipment permanently measures the current and voltage in a three-phase network. Calculate the current and total power, the PHI power factor and the reactive energy that is actually consumed. The control through Z-Wave allows to act the relays (available separately), as well as to evaluate the results of the measurements of the device. With the energy data we can carry out the most varied actions, such as being alerted if the consumption exceeds a certain limit, sliding loads to keep the consumption below a certain level, etc.

to work with ZWGOA ZMNHTD1 Smart Meter
wired connection
Voltage: 230V ± 10%, 50-60Hz
Current: 32A, 2 pole

to work with ZWGOA ZMNHTD1 Smart Meter
Infra-red connection
Voltage: 230V ± 10%, 50-60Hz
Current: 32A, 4 pole

Temperature sensor can be installed inside this Wall mounted casing. The dimensions of the Wall mounted casing are 71mm x 71mm x 27mm. This casings are made from ABS material and are available in white colour.

Temperature sensor can be installed behind this 2M casing SET. It is suitable for mounting on boxes Ø60 with claws. SET consists of: 1 x cover plate1, 2 x 1M perforated blank cover and 1 x mounting frame 2M with claws. 2M casing SET is made of PC/ABS material and comes in 2M dimensions. 2M casing set is available in polar white colour.

Digital Temperature sensor has 1m cable with connector to connect directly to the different modules. The digital temperature sensor range is between -50°C and +125°C.

Din rail enclosure that can be used to mount Fibaro modules on DIN rails.

Expander for CMEB box.
It fits on the side of the CMEB and it makes it 17,5mm wider and adds 8 terminals.

SPU-DIM-C02 can control single colour LED strips from a standard push switch or from a 0-10V or 1-10V from any manufacturer. The controller can be connected to one or more push switches (check wiring diagram) or with 0-10V or 1-10V signals