CentralCasa. Promotions

ZipaBox2 from ZIPATO

zb2.main

The Zipabox2 by Zipato is a very flexible smart home gateway. Factory-made, it does not have a wireless technology, but thanks to its modular expansion capability it can be extended with additional smart home technologies such as Z-Wave, ZigBee, EnOcean, 433MHz and KNX. All extension modules are available separately and can be connected to the Zipabox via snap-in connection. The Zipabox2 has an easy to use but powerful web-based user interface which allows to monitor all connected devices and automation rules, created with the ‘Zipato Rule Creator’. The intuitive graphical user interface allows to create own scenes and rules without programming skills.

Zipatile2 Z-Wave + ULE (Black)

zt2.gbs.zweu.ule

ALL - IN - ONE SMART HOME SERVER
Z-Wave and ULE touch panel controller. Black with silver frame

Zipatile2 Z-Wave + ULE (White)

zt2.gws.zweu.ule

ALL - IN - ONE SMART HOME SERVER
Z-Wave and ULE touch panel controller. white with silver frame

Home Center 3

ZWFIB FGHC3

Home Center 3 is the most advanced smart home hub available on the market. It combines the most outstanding and cutting-edge features in terms of hardware technology and UX characteristics. The device has been created in close cooperation with FIBARO users and installers and comes as the result of our ten years smart home experience. Integrate FIBARO with over 2000 third-party products operating in various technologies and easily control different kind of smart appliances such as lighting, roller blinds, HVAC, alarm, surveillance or watering system – everything done with a simple press of a button, gesture or with a word. Everything packed up in an ingenious and refined design.

Home Center 3 Lite

ZWFIB HC3L-001

Smart home starts here!

New wireless communication using the Z-Wave 700 technology
Efficient hardware architecture
Designed for smaller automation systems
Scenes/Macros programming through block scenes and LUA
Highest data security

Z-Wave Home Center 2 Gateway

ZWFIBHOMEC2

Fibaro Home Center 2 is a consumer electronics device used for home automation. Home Center 2 gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).

Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.

Home Center 2 integrates multiple complicated control, automation and internet protocols into one simple plug’n’play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.

Dimmer 2 - 250W Universal Insert Module

ZWFIB FGD-212

Z-Wave Fibaro Universal Dimmer 2 250W
FIBEFGD-212
FGD-212

Remotely controlled light dimming module is designed to work with various types of light sources. It may be connected to two-wire or three-wire configuration so it can operate with or without neutral lead. FIBARO Dimmer 2 can switch or dim connected light source either through radio waves or through the wall switch connected directly to it.
New FIBARO Dimmer 2 is equipped with an algorithm of smart light source detection which makes configuration easier and ensures high compatibility of the device. It may be used as a switch with non-dimmable light sources (in 3-wire connection).

Dimmer Bypass 2

ZWFIB FGB-002

Bypass Fibaro is a device complementary to Fibaro Dimmer FGD212. Its installation makes possible to dim light sources with minimum power consumption, such as e.g. single 0,5Watt LED. Please note it is possible to dim only light sources clearly marked as dimmable.

Door/Window Sensor 2

ZWFIB FGDW-002-x

FIBARO Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Changing the device’s status will automatically send signal to the Z-Wave controller and associated devices.

Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. Opening is detected by separating the sensor’s body and the magnet.

In addition the FIBARO Door/Window Sensor 2 is equipped with a built-in temperature sensor.

Double cover plate for Walli devices

ZWFIB FG-Wx-PP-0003

Double cover plate for Walli devices.

Fibaro Double Smart Module

ZWFIB FGS-224

The remotely operated FIBARO Double Smart Module is designed to turn electrical devices or circuits on and off.
The Double Smart Module (FGS-224) allows to control two devices or circuits.
The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.

Fibaro Motion Sensor Z-Wave Plus

ZWFIB FGMS-001 ZW5

The Fibaro Motion Sensor is a universal Z-Wave multi-sensor. Along with detecting motion the device measures the temperature and light intensity. The sensor has a built-in accelerometer to detect any tampering of the device. The Fibaro Motion Sensor is battery powered device and designed to be installed quickly and easily on any surface. The LED indicator signals motion, temperature level, operating mode and can be used to see if device is within the Z-Wave network. The motion sensor can be used for lighting scenes and security monitoring systems.

Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com

Fibaro Radiator Thermostat Sensor

ZWFIB FGBRS-001

The Fibaro Radiator Thermostat Temperature Sensor is a wireless temperature sensor which can be used with Fibaro Radiator Thermostat to provide best temperature regulation. It can be placed anywhere in the room and the device will use it as a reference point for the room temperature. One head can be paired with only one sensor, but one sensor can be paired with three heads.

Fibaro Smart Module

ZWFIB FGS-214

The remotely operated FIBARO Smart Module and Double Smart Module are designed to turn electrical devices or circuits on and off.
Smart Module (FGS-214) allows to control one device or circuit and the Double Smart Module (FGS-224) allows to control two devices or circuits.
The compact size of the device allows for the product to be installed in the housings of other devices. The devices can be controlled either via the Z-Wave network or with buttons connected directly to them.

Fibaro Thermostat for Radiator Valves

ZWFIB FGT-001

FIBARO Radiator Thermostat is a remotely controlled thermostatic head to control temperature in your room. It measures the temperature and automatically adjusts the heat level. It can be mounted without tools on three types of thermostatic radiator valves. You can create schedules via app to easily manage temperature throughout the week.

Flood Sensor Z-Wave Plus

ZWFIB FGFS-101 ZW5

The Fibaro Flood Sensor will alert you of a threatening flood or a rapid temperature rise or drop and has a wide variety of additional functions. Thanks to its flexible gold telescopic probes the device can even work on uneven surfaces. The Flood Sensor has a built in alarm siren which will help you to react quickly in case of a flood, rapid temperature change or the attempt to tamper with it. Aside from the alarm siren, the device can alert you of a threat using colour displays from the built in RGB diode. In addition to this a tilt sensor will detect tilt and movement over 15 degrees and send out a report to the main controller. The built in temperature sensor can not only be used to serve as a fire alarm sensor, it may also be used to manage an in-floor heating system.

The Input terminal allows you to connect an external probe and install the sensor in any location. The Output terminal allows for a connection to an alarm system.

The Sensor will work on 12 or 24 VDC or battery.

Relay Insert 1 channel Switch2 Z-Wave Plus

ZWFIB FGS-213

FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

Relay Insert 2 * 1.5 KW Z-Wave Plus

ZWFIB FGS-223

FIBARO Switch 2 is designed to be installed in standard wall switch boxes or anywhere else where it is necessary to control electric devices. FIBARO Switch 2 allows to control connected devices either via the Z-Wave+ network or via a switch connected directly to it and is equipped with active power and energy consumption metering functionality.

RGBW Controller 2

ZWFIB FGRGBW-442

FIBARO RGBW Controller 2 is a universal, Z-Wave Plus compatible RGB/RGBW controller.

FIBARO RGBW Controller 2 uses PWM output signal, allowing it to control LED, RGB, RGBW strips, halogen lights and other resistive loads. It can also measure active power and energy consumed by the load. Controlled devices may be powered by 12 or 24V DC.

Inputs support momentary/toggle switches and 0-10V analog sensors, like temperature sensors, humidity sensors, light sensors etc.

Roller shutter 3

ZWFIB FGR-223

Fibaro Roller Shutter 3 is a universal, Z-Wave PLUS compatible, electric motor controller. The device allows for controlling motors of roller blinds, awnings, venetian blinds, gates and others, which are single phase AC powered. Fibaro Roller Shutter allows for precise positioning of a roller blind or venetian blind lamellas. Precise positioning is available for the motors equipped with mechanic and electronic end switches.

Single cover plate

FG-Wx-PP-0001

Single cover plate

Triple cover plate for Walli devices

ZWFIB FG-Wx-PP-0004

Triple cover plate for Walli devices.

Walli controller

ZWFIB FGWCEU-201

The FIBARO Walli Controller is a part of FIBARO Walli line of smart devices. The smart wall-mounted Z-Wave remote controller can activate scenes or control various types of Z-Wave devices, e.g. switches, dimmers, roller shutters. A Pre-set configurations allow to easily adjust operation for specific type of controlled devices

walli conventional outlet

FGWSONF-011

An conventional electrical outlet that matches the design of the smart Walli outlets and switches.

Walli Dimmer

ZWFIB FGWDEU-111

Intelligent lighting dimmer with integrated light switch. Works with commercially available lighting source such as: LED diodes, compact lamps, traditional bulbs and halogen lamps. The device is equipped with automatic calibration functions and active power and energy measurement.

Walli N Ethernet Outlet

ZWFIB FGWEEU-021

Double Ethernet socket equipped with 2 RJ45 cat.6 sockets.

Walli N TV-SAT Outlet

ZWFIB FGWTFEU-021

High quality tool-free TV-SAT socket with 2 SAT connectors and 1 TV connector.

Walli N USB Outlet

ZWFIB FGWU-021

Socket with a double USB charger with a 2400mA charging current (total).

Walli Roller Shutter

ZWFIB FGWREU-111

Intelligent roller blinds controller that allows you to manage the gate, roller blinds, blinds and scenes with a single click.

walli Smart Outlet type F

ZWFIB FGWOF-011

An intelligent electrical outlet that allows to control and manage the device connected to it. Equipped with a LED ring, informing about current consumption. The maximum load is 3680W.

Walli Switch

ZWFIB FGWDSEU-221

An intelligent switch integrated with the button used in a system with one or two independently controlled loads. Designed for quick installation in sockets. Equipped with a LED ring and functionalities known from Fibaro modules.

Z-Wave Plus CO Sensor

ZWFIB FGCD-001

The FIBARO CO sensor will make your home safer and prevents danger caused from the ‘silent killer’ carbon monoxide (CO). The sensor detects reliable carbon monoxide in the air and alarms in case of exceeded limits. Its high sensitivity allows to detect the presence of the carbon monoxide (CO) gas at the early stage in order to prevent carbon monoxide poisoning.

The device alarms via an integrated siren and blinking LED. Additionally, automatic scenes can be triggered within the Z-Wave gateway and notifications can be sent.

Additionally the device is equipped with a temperature sensor.

The FIBARO CO Sensor is a life-saving device, therefore tests to conform compliance with the applicable requirements of the standard EN 50291-1:2010 are conducted by the BSI Group accredited testing laboratory.

Z-Wave Plus Smoke sensor 2

ZWFIB FGSD-002

The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).

Smoke detection is signaled through siren and LED diode blinking.

The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.

The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

Z-Wave Wall Plug w/ metering - F plug (Shucko)

ZWFIB FGWPF-102-5

Fibaro Wall Plug is a universal, Z-Wave compatible, relay switch in the form of a socket adapter. The Plug may be used to operate any device up to 2,500W power output. The Plug features power consumption measuring and uses a crystal LED ring to visualize the current load by colour changing illumination.
Fibaro Wall Plug may be operated using the service button located on its casing, or via any Z-Wave compatible controller.

Need price for quantities? Please contact us!
Chat tool;
Contact form;
Phone: +351 223 744 938 ;
email: [email protected] ;
Skype: EuroX10.com

Aeotec Smart Switch 7

ZWAEO ZW175

Smarter. Safest. Smaller still. Plug it. Automate it. Control it. Understand how much electricity you are spending. Smart Switch 7 is Aeotec's smallest smart plug and is also everyone's safest.

Intelligence is in control. Appliances turn on when needed and off when not. On a schedule. Or intelligently automated and triggered when needed. You are completely in control. It is smart because it can be automated. But it's also a smart plug because the power to turn it on or off manually is always yours.

In real time and with 99% accuracy, Smart Switch 7 will analyse appliances electricity consumption helping you save what you spend. Furthermore the Smart Switch 7 is one of the best in design and quality. European design, German engineering and SGS certfication make Smart Switch 7 the smallest and safest smart plug.

Dimmer Micromodule with energy metering

ZWaeoMSEI

The Aeon Labs Micro Smart Energy Illuminator is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

Dual Nano Switch with Energy Meter

ZWAEO ZW132

With the AEOTEC Dual Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Additionally, the ZW132 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

Heavy Duty Switch

ZWaeo_HDS

The Aeon Labs Heavy Duty Switch is used for wireless control, automate and record the power consumption of heavy loads up to 40 amps. The Device can be controlled by other Z-Wave devices and can switch his heavy loads. He also works as a repeater and can forward, if the respective device are in range, signals to other Devices.

Micro Energy Illuminator

ZWaeoMEI

The Aeon Labs Micro Energy Illuminator Micro is a Z-Wave light dimmer specifically used to enable Z- Wave command and control (on/off/dim) for existing in-wall dimmers. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

Micro Switch

ZWaeoMES

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

Nano Dimmer

ZWAEO ZW111

The AEOTEC Nano Dimmer is a flush-mounted radio module which turns a standard light installation into an intelligent smart home component with Z-Wave wireless technology.

The compact radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls (switch/dim) the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

Nano Shutter

ZWAEO ZW141

Close your motorized windows automatically if it starts raining or shut down your shades if it is to warm outside. The Aeotec Nano Shutter enables you to control a broad selection of devices wirelessly and intelligently. The module equips motors for shutters, shades, garage doors, venetian blinds, etc. with Z-Wave technology. Thus, shutters and venetian blinds can be controlled both wirelessly via Z-Wave commands and locally via the connected conventional wall switch. The Aeotec Nano Shutter is designed to be mounted inside a flush mounting box, hidden behind a conventional wall switch.

Nano Switch with Power Metering

ZWAEO ZW116

With the AEOTEC Nano Switch all switchable and non-dimmable electric installations (e.g. lighting, sockets...) can be integrated into a Z-Wave network. Thus, the connected load can be switched both wirelessly via Z-Wave and locally via existing wall switch. Additionally, the ZW116 has an integrated power metering function which allows to detect the exact energy consumption of the connected load.

The compact radio module (60% smaller than its predecessor Micro Smart Switch) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.

ON/OFF Micromodule with energy metering

ZWaeoMSES

The Aeon Labs Smart Energy Switch Micro is a low-cost Z-Wave appliance switch specifically used to enable Z-Wave command and control (on/off) for existing in-wall switches. It can also report immediate wattage consumption or kWh energy usage over a period of time. The wireless module is powered from the mains supply and is a three-wire design which requires a neutral connection. In the event of power failure, non-volatile memory retains all programmed information relating to the units operating status.

RGB bulb

ZWAEOEZW098

With AEOTEC’s new and smart RGB bulb color comes into play. The Aeotec bulb fits into every E27 bulb holder and connects to a smart home center through Z-Wave wireless technology. It is able to vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes.
The bulb uses 15 different LED diodes to shine in perfect shading of natural white light. These 15 diodes confer light temperature of 2580-7050K on the LED bulb.

Cold white: 4745K to 7050K;
Natural white: 3710K to 4745 K;
Warm white: 2580K to 3710K ;

Well-known manufacturers such as Samsung and Philips also use the same LED technology.
An additional row with diodes gives Aeotec’s bulb the opportunity to vary between 16 million colors.
Furthermore the bulb can be switched on and off time-controlled via defined scenes or by a motion sensor. Use your Aeotec bulb as notification or status LED. Installed in the corridor it could flash in red color if you want to leave your home and windows or terrace door are still open. Due to LED technology power consumption is very low compared to conventional bulbs. The Aeotec bulb is as bright as a conventional 70W bulb, but needs only 9W.

Smart Switch 6

ZWAEO ZW096 EU

The Smart Switch 6 is an intelligent adapter plug which can be switched by mobile remote control, wall switch, smartphone or through automation. Thanks to Z-Wave the Smart Switch 6 is more than an ordinary socket. Plug it into any power outlet in your home and that outlet is instantly smarter because lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.
And because it’s truly smart, Smart Switch 6 offers much more than just wireless control.

Save on what you spend.
Smart Switch 6 has world-class energy monitoring technology built right in. In real-time it can understand how much electricity your devices are using and let you know.

It does that via the Aeotec LED Ring. 16 million colours of light are used to visually communicate how much electricity is being used.

See what you spend.
Smart Switch 6 doesn’t just visually communicate how much electricity you’re using, it also reports it back to your Z-Wave gateway in real-time. From anywhere in the world you’ll be able to see which devices are turned on and how much that is costing you. Compatible gateways will also help you store and analyse your historical energy consumption. Besides a colored LED ring at the Smart Switch shows the energy consumption of the connected device.

The LED ring can be configured as follows:
• Disabled: The LED ring is switched off permanently
• Bicolored: Blue shows that the connected device is switched on, White shows that it is switched off
• 16 milion colors: Colors vary from Blue to Yellow, Green up to Red (Blue shows low, Red shows high energy consumption of the connected device)

The Smart Switch 6 has a dimension of only 60 x 60 mm and is therewith 43% smaller than its forerunner - however it is smart and practical. In a time when tablets, smartphones and many other devices can be charged with power via USB it is obvious that Smart Switch 6 owns an additional USB port alongside.

SmartThings Hub V3

GP-AEOHUBV3EU

The SmartThings Hub V3 is the central connection and acts like the intelligent brain of your modern Smart Home. It allows you to connect wirelessly to a wide range of smart devices.
The associated SmartThings App on your Smartphone becomes the basic control center. The hub connects to your router via Wi-Fi or the included LAN cable and is ready to go in no time.

Note from Smarthings and Aeotec/Z-Wave Europe:
"The former Samsung SmartThings Hub has only changed its name. Technically it is the same product.
There is just a change in branding of this product. Now it is called “Aeotec Smart Home Hub - Works as a SmartThings Hub”.

Based on a worldwide agreement between Samsung and Z-Wave Europe, Z-Wave Europe GmbH is the SmartThings sales channel for the “Works with SmartThings Hub” and other SmartThings components.
Therefore, Samsung points customers and prospects to Z-Wave Europe, when they ask for the SmartThings Hub. Of course the user has access to the very large Smart Home Ecosystem, which is based on the SmartThings App."

Relay Insert 2 * 1.5 KW

ZWPHI PAN06

The Philio Insert Switch allows controlling two independent loads both wirelessly via Z-Wave and locally utilizing a traditional wall switch. Thanks to its calibration technology the PAN06 cannot only be used to switch AC devices ON and OFF, it also works perfectly with many kind of light, e.g. incandescent, fluorescent and LEDs. In addition to this, the PAN06 can be connected to 12V/DC, which makes it possible to switch 12V MR-16 light as well. The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the insert that is controlling the load. This device is designed for a 3 wire system and needs a neutral wire in the wall box.

Relay Insert 2 * 1.5 KW with energy metering

ZWPHI PAN04

This in-wall dual relay switch module is a transceiver which is a Z-Wave Plus enabled device and is fully compatible with any Z-Wave enabled network.Mini size design let the module can easily hide itself into the wall box and that will be good for the house decoration. There are many kind of application by using the module to switch AC power On and Off, one main application is the light control. The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of light like incandescent, fluorescent and LED light.This in-wall switch module is able to detect Instant power wattage and overload current (7.5A) of connected light or appliances. When detecting overload state, the Module will be disabled and its On/Off button will be lockout of which LED will flash quickly. However, disconnect and re-connect the Module will reset its overload condition to normal status.

Z-Wave Plus Relay Insert Blind

ZWPHI PAN08

The Philio Roller Shutter Controller insert allows controlling motors for jalousies and blinds both via Z-Wave wirelessly and locally utilizing a traditional wall switch.
The device is placed in a wall box right behind the normal switch. The switch is not longer directly connected to the load but acts as input device for the Philio insert that is controlling the load.
This relay is able to detect the position of the shutter by using the patterned power measuring method. So it can be remote controlled not only fully up or down, but also can be adjusted to e.g. 30% or 50%. And when manual controlled by using the push button, the controller also can memorize the position and send the new shutter position to its controller (ex. IP-Gateway).
The new smart relay calibration technology can reduce the inrush current caused by the load and let the module work perfectly with many kind of roller shutter.

iConnect2 full two way system (IP+GPRS)

iC2

The iConnect Control System is a full-featured 2-way wireless control system that is expected to provide a solution to the needs of most residential installations. This system has been developed based upon a design concept geared towards easy installation and use. With this in mind, the user interface is based on a simple, menu-driven model that suits the essential requirements of both the user and installer alike. You can program the iConnect Control System on-site using the on-Front Panel keypad or PC, or off-site via a PC using local programming option of the Remote Programmer.

SecuSafe

SECUSAFE

Kit SecuSafe 2G/IP 868MHz with:
1x 2-way iConnect 2G/IP (Ref: iC2GIP)
1x Wireless 2-Way PIR/PET Camera Detector (Ref: EL-4855PI)
1x 2-Way Dual Magnetic Contact Universal Transmitter (Ref: EL-4801DZ)
1x Wireless Round Multi-Function Keyfob (Ref: EL-4714)

The 2-Way iConnect 2G/IP is a powerful, versatile, 2-way wireless intrusion system designed for residential and small-business markets. It includes a 2G/IP module inside.
The connection to the ELAS server or cloud-based Risco Cloud allows users to remotely control their iConnect 2-way systems through the MyELAS application (also available through the web browser). The visual verification is also compatible with infrared camera detectors (PIRCAM) that allows users to view images, on demand, of their homes or businesses directly from their smartphones, will allow you to feel safe with everything under control and at all times. Users will receive email / SMS / voice notifications in the event of an alarm, and can also arm or disarm their 2 way remote iConnect systems.
IConnect 2-way is compatible with GPRS, GSM and IP (ADSL), there is also a version with IP communication and RTC (EL-IPTA). It can be configured remotely by the installer with a significant time and inconvenience. A wide range of 2-way detectors and accessories can be used with the system.

The Wireless 2-Way PIR / PET Camera Detector is a battery powered 2-Way wireless PIR/PET detector that includes an integrated camera for visual verification and is compatible with all Electronics Line 2-Way security systems.

The 2-Way Dual Magnetic Contact Universal Transmitter is a 2-Way wireless device that can be defined as a magnetic contact, universal transmitter or both in combination. The EL4601DZ is for use with the iConnect 2-Way security system.

The Wireless Round Multi-Function Keyfob is anEL’s newly designed miniature keyfob that can easily fit onto a keychain for fashionable convenience and control. The wireless device uses a single off-the-shelf battery, with efficient power use for longer battery life. It's a four-button keyfob with five functions: Full, Part & Perimeter Arm, Disarm, Home Automation On/Off, Panic Alarm Generation. It has LED transmission indication and also flashes to indicate low battery. Includes status indication.

This reference will be sold until the end of the actual manufacturer stock

1&2-Way Wireless Curtain PIR Detector

EL5850

The Wireless Curtain PIR is a stylish wall mounted passive infrared detector.

180 ° ball head for EL5835 detectors

EAUS350SW00A

2-Way Dual Magnetic Contact Universal Transmitter

EL4801DZ

The EL-4801DZ is a 2-Way wireless device that can be defined as a magnetic contact, universal transmitter or both in combination. The EL4801DZ is for use with the iConnect 2-Way security system.

2-Way Wireless Vibration Detector

EL4607

The 2-Way Wireless Vibration Detector senses low-amplitude vibrations around vulnerable access points, setting off an alarm before an intruder has a chance to enter the premises. Being 2- way, the sensitivity can be adjusted via the panel using a scale of 1-100, 1 being the lowest, and where necessary, can be modified via the remote programmer.

This detector provides an added value in that it sounds off during the first stage of a break-in attempt, before any damage can be done.

1 & 2-Way Smoke & Heat Detector

EL5803

Electronics Line’s EL-5803 Wireless Smoke and Heat Detector combine advanced technologies within a compact and streamlined design, the ideal choice for homeowners seeking the highest safety standards.
Smoke is detected employing an advanced photoelectric chamber, whiletemperature is monitored with two separate heat sensors that measure the rate-of-rise, as well as the absolute temperature. With a choice of selecting either smoke or heat detection or a combination the two, the Smoke and Heat Detector offers a more sensitive and dependable product for early detection of fire hazards in different environments with a reduced risk of false alarms.
The Smoke Detector is EN14604:2005/AC:2008 certified, easy to install, and is compatible with all Electronic Line’s 1 and 2-way wireless systems.

DT outdoor detector

EL5835D

The Wireless Beyond DT detector integrates RISCO's state-of-the-art innovative technologies for optimal protection. The Wireless Beyond offers flexibility, ease of installation and auxiliary solar Swivel for unprecedented battery life.

DT outdoor detector with camera

EL5835DC

Beyond offers one of a kind combination of dual technology and integrated camera, providing crystal clear visual verification capability via the iRISCO smartphone app., web interface or monitoring station. These new features are combined with RISCO's unique detection technologies of Sway Recognition™ and Digital Correlation™ which drastically reduce false alarms in outdoor environments and Provide an ultimate outdoor detection solution.

two way smoke detector

EL4703

TWO WAY Wireless Flood Detector

EL4801F

The EL Flood Detector uses micro-controller based signal processing to provide early warning of water leaks.
The compact, robust device is ideal for use in basements or near air conditioners and sinks, and works independently during power outages.

Wireless 1 & 2 Way PIR/PET

EL5845PI

The EL Wireless 1 & 2 Way PIR /PET protects both iConnectTM and CommPactTM systems with advanced Passive Infrared (PIR) intrusion-detection capabilities by sensing motion in the protected zone – even in total darkness. Offering a choice of selectable 1-way or 2-way RF communication, the PIR is powered by two long-life Lithium batteries and includes a "sleep" feature that ignores events during disarming – for battery power-conservation, and for user privacy. A pet-friendly design enables a pet (up to 45 kg. / 99 lbs.) to roam freely without triggering an alarm. Easy to install, a built-in bracket enables either wall or corner mounting for optimal detection coverage.

Wireless 2-Way PIR / PET Camera Detector

EL4855PI

The EL4855/EL4855PI is a battery powered 2-Way wireless PIR/PET detector that includes an integrated camera for visual verification and is compatible with all Electronics Line 2-Way security systems.

16 Channel VUpoint NVR

VUNVR16

VUpoint NVR is RISCO’s superior plug & play recording solution. The VUpoint NVR is fully integrated with RISCO cloud, serving as a complimentary solution to VUpoint live verification solution based on P2P IP cameras.
This comprehensive video solution, which provides video verification, live view, recording and playback, is fully integrated with RISCO’s Cloud based professional security systems, and it’s plug and play P2P functionality requires no special training or knowledge to install and maintain.
This is a unique opportunity for installers and monitoring stations to enjoy state-of-the-art technology and growth potential of video installations, while providing customers with both reliable real time video verification and an unprecedented level of video security and privacy

• HD Video verification of events, live video on demand and recording playback – from anywhere, anytime via a smartphone app.
• P2P technology allows a simple Plug & Play installation – without router configuration.
• A selection of indoor and outdoor cameras with PoE or Wi-Fi capability for an effortless installation.
• Cloud based cutting edge technology for both existing and new RISCO security systems, providing high added value to both installers and customers.
• Significant potential for increased revenues and dramatic sales growth.

RVNVR160020A

2MP Full HD WiFi Cube Camera

RVCM11W1500A

Indoor Cube Camera, 2MP, IR LED 10m, 2.8mm, 105 °, WiFi.

4 Channel VUpoint NVR

VUNVR4

VUpoint NVR is RISCO’s superior plug & play recording solution. The VUpoint NVR is fully integrated with RISCO cloud, serving as a complimentary solution to VUpoint live verification solution based on P2P IP cameras.
This comprehensive video solution, which provides video verification, live view, recording and playback, is fully integrated with RISCO’s Cloud based professional security systems, and it’s plug and play P2P functionality requires no special training or knowledge to install and maintain.
This is a unique opportunity for installers and monitoring stations to enjoy state-of-the-art technology and growth potential of video installations, while providing customers with both reliable real time video verification and an unprecedented level of video security and privacy

• HD Video verification of events, live video on demand and recording playback – from anywhere, anytime via a smartphone app.
• P2P technology allows a simple Plug & Play installation – without router configuration.
• A selection of indoor and outdoor cameras with PoE or Wi-Fi capability for an effortless installation.
• Cloud based cutting edge technology for both existing and new RISCO security systems, providing high added value to both installers and customers.
• Significant potential for increased revenues and dramatic sales growth.

RVNVR040020A

4 Channel VUpoint NVR POE

VUNVR4POE

VUpoint NVR is RISCO’s superior plug & play recording solution. The VUpoint NVR is fully integrated with RISCO cloud, serving as a complimentary solution to VUpoint live verification solution based on P2P IP cameras.
This comprehensive video solution, which provides video verification, live view, recording and playback, is fully integrated with RISCO’s Cloud based professional security systems, and it’s plug and play P2P functionality requires no special training or knowledge to install and maintain.
This is a unique opportunity for installers and monitoring stations to enjoy state-of-the-art technology and growth potential of video installations, while providing customers with both reliable real time video verification and an unprecedented level of video security and privacy

• HD Video verification of events, live video on demand and recording playback – from anywhere, anytime via a smartphone app.
• P2P technology allows a simple Plug & Play installation – without router configuration.
• A selection of indoor and outdoor cameras with PoE or Wi-Fi capability for an effortless installation.
• Cloud based cutting edge technology for both existing and new RISCO security systems, providing high added value to both installers and customers.
• Significant potential for increased revenues and dramatic sales growth.

HDD not included

RVNVR04002PA

4MP 25x PTZ Camera

RVCM82E2500A

VUpoint
4MP 25x PTZ Camera

8 Channel VUpoint NVR POE

VUNVR8POE

VUpoint NVR is RISCO’s superior plug & play recording solution. The VUpoint NVR is fully integrated with RISCO cloud, serving as a complimentary solution to VUpoint live verification solution based on P2P IP cameras.
This comprehensive video solution, which provides video verification, live view, recording and playback, is fully integrated with RISCO’s Cloud based professional security systems, and it’s plug and play P2P functionality requires no special training or knowledge to install and maintain.
This is a unique opportunity for installers and monitoring stations to enjoy state-of-the-art technology and growth potential of video installations, while providing customers with both reliable real time video verification and an unprecedented level of video security and privacy

• HD Video verification of events, live video on demand and recording playback – from anywhere, anytime via a smartphone app.
• P2P technology allows a simple Plug & Play installation – without router configuration.
• A selection of indoor and outdoor cameras with PoE or Wi-Fi capability for an effortless installation.
• Cloud based cutting edge technology for both existing and new RISCO security systems, providing high added value to both installers and customers.
• Significant potential for increased revenues and dramatic sales growth.

RVNVR080020A

Bullet 4MP PoE Camera

RVCM52P2000A

Outdoor Bullet IP Camera, 4MP, IR LED 30m, 2.8mm / F2.0, 93 °, PoE, IP67, Micro SD slot (up to 256Gb) - card not included

Bullet 4MP Varifocal PoE Network Camera

RVCM52P2200A

VUpoint
Bullet
4MP Varifocal PoE
Network Camera

Câmara Dome WiFi full HD 2MP

RVCM32W1600A

Indoor / Outdoor Dome Camera

Câmara PT WiFi

RVCM61H1700A

Wi-Fi full HD 2MP Câmara PT WiFi

Câmara Tubular WiFi

RVCM52W1400A

Outdoor Bullet IP Camera

Dome 4MP PoE Camera

RVCM32P1900A

Indoor / Outdoor Dome IP Camera, 4MP, IR LED 30m, 2.8mm / F2.0, 93 °, PoE, IP67, H.265, Micro SD slot (up to 256Gb) - card not included

Eyeball 4MP PoE Network Camera

RVCM72P2100A

VUpoint
Eyeball 4MP PoE
Network Camera

Eyeball 4MP Varifocal PoE Network Camera

RVCM72P2300A

VUpoint
Eyeball 4MP Varifocal PoE
Network Camera

IP Eyeball P2P PoE Network Camera - VuPoint

IPEYEBALL POE

IP Camera Eyeball Outdoor, 2MP, IR LED 50m, f 3.6mm / 87 °, PoE, IP67, Microphone, Micro SD slot (up to 128Gb) - card not included

RVCM72P1200A

Outdoor IP P2P PoE Camera - VuPoint

IPBULLET POE

IP Camera Bullet Outdoor, 2MP, IR LED 40m, f 3.6mm / 87 °, PoE, IP67, Micro SD slot (up to 128Gb) - card not included

RVCM52P1100A

Outdoor Wi-Fi IP camera - VuPoint

IPBULLET

VUpoint is a revolutionary live video verification solution which seamlessly integrates IP Cameras within RISCO’s professional security systems. Powered by the RISCO Cloud (RISCO Application Server), VUpoint provides an unprecedented level of security and live video monitoring capabilities to monitoring stations and end-users alike. The RISCO cube indoor IP Camera is an important part of this solution and is easily controlled through RISCO’s intuitive Web and Smartphone applications. With VUpoint, users can “look in” on their premises on demand to view live video clips of their premises of up to 30 seconds length through RISCO Group’s intuitive MyElas smartphone app. In addition, video clips can be viewed in response to a wide range of triggers, (detector alarm event, panic alarm, or system disarm by code), providing unparalleled peace of mind for end-users, and enabling monitoring stations to simply verify false alarms, saving on unnecessary visits to the premises and wasted resources. Designed for an ease of installation with no router configuration, installers can quickly and simply integrate VUpoint P2P IP cameras within all of RISCO's professional security systems without any special training or knowledge, via a simple, cable-free "plug & play" installation.

RVCM52W0100B

P2P PoE indoor IP Camera - VuPoint

IPCUBE POE

IP Camera Cube 1.3MP Indoor, IR LED 10m, 2.8mm / 92 ° F, PoE, Microphone and Speaker, Micro SD slot (up to 128Gb) - Card not included

RVCM11P0900A

Pan-Tilt P2P IP Camera - VuPoint

IPPAN-TILT

Indoor Pan-Tilt IP Camera, 1.3MP, IR LED 10m, f 3.6mmm / 72.2 °, WiFi, Microphone and Speaker, Micro SD slot (up to 128Gb) - card not included

RVCM61H0300A

Z-TEMP2 thermostat for water based heating

54 304 99

Heatit Z-Temp2 is a temperature sensor designed for use with waterbased heating systems. Using it in combination with the Heatit Z-Water regulator allows for an advanced waterbased heating solution that can be managed from a Z-Wave gateway.
This is a “wire-free” solution, saving both time and money. All communication between the Heatit Z-Temp2 and the controlled device is 100% wireless. Heatit Z-Temp2 has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On startup all the devices will automatically be included in the gateway (requires SmartStart compability). This saves the installer a lot of work.

art. 45 126 66

Z-TRM3 electronic thermostat

54 305 99

Heatit Z-TRM3 is an electronic thermostat for electrical floor heating, designed to be mounted in a standard flush box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems. Heatit Z-TRM3 has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On startup all the devices will automatically be included in the gateway (requires SmartStart compability). This saves the installer a lot of work.

Art. 54 305 99

MH3901-Z Boiler Thermostat

ZWMCO MH3901-Z

MH3901-Z is a smart boiler thermostat, it can automatically detect the indoor temperature and display the relevant temperature value for boiler heating control.

It also can automatically turn on/off the heating system according to the temperature difference.
The device can be remotely controlled by Z-Wave network.

MH7H-EH Electring floor Heating Thermostat

ZWMCO MH7H-EH

The ZWMCO MH7H-EH thermostat is a device for room temperature control, equipped with Z-Wave wireless technology. It is applied to control electrical heating systems such as heating cable, electro-thermal film, heating actuator, electrical globe valve etc.
The wall thermostat ZWMCO MH7H-EH requires a static installation with mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas.
With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc.

MH7-WH Water Heating Thermostat

ZWMCO MH7H-WH

The MCOEMH7H-WH thermostat is the second Generation of the MCO Home Underfloor water heating thermostat. The thermostat is designed to be used for room temperature control, equipped with Z-Wave wireless technology. It is applied to control water heating systems such as wall mounted boiler, water valve/pump, under floor pipes, radiator systems etc. and electrical systems such as heating cable, electro-thermal film, heating actuator, electrical globe valve etc. The second Generation has the functionality to be connected in its association group with binary actors like plugs and relays. That allows you full control of any On/Off heating actuator via the MCOEMH7H-WH2 without the permanent use of a static Z-Wave controller. The wall thermostat MCOEMH7H-WH2 requires an installation with permanent mains power. Thanks to its modern design with capacitive glass touch panel it is particularly suited for visible installation in living areas. With the modern designed glass touch thermostats by MCO you can control various heating and cooling systems – e.g. heating cable, heating film, water valve, electrical valve, boiler, fan coil, solar energy controller, heat pump, ventilation system etc.

MH8-FC Fan Coil Thermostat 2 pipe

ZWMCO MH8-FC

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 2-pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

MH8-FC4 Fan Coil Thermostat 4 pipe

ZWMCO MH8-FC4

MCOHome Fan Coil Thermostat is a Z-Wave enabled device for indoor temperature control. It is mainly applied to a 4-pipe Fan coil system. It can read room temperature and local time, and automatically control fan speed based on the temperature difference. The device is of high reliability and practicability. This product can be included and operated in any Z-Wave network with other Z-Wave certified devices from any other manufacturers.

Schuko Z-Wave dimmer Wall Plug

ZWEVR AD1472

With the switchable Z-Wave plug adapter AD 1472 by Everspring your lights will become smart. Simply plugged between a wall outlet and a lamp it gives you the possibility to control the light an intelligent way.
You are already on the way to work and can’t remember if all lamps at home were turned off? With the switchable Z-Wave plug adapter you don’t need to worry. Switch on and off connected lights from anywhere using your mobile device.
Commissioning is very easy: Activate the learning mode on your Z-Wave control center and insert the Everspring plug adapter in a wall socket. Thanks to the auto mode inclusion you don’t need to do anything else.
Now you can switch lamps with a load up to 250W conveniently via remote control, smartphone or by intelligent automation.
Of course you can use the plug adapter as part of an automated scene defined in your Z-Wave Smart Home Gateway to switch your lights on and off or dim up and down.

Z-Wave Presence Detector

ZWevrSP814

This presence detector using PIR (passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device.
The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.

The device has changeable lenses to optimize the monitoring of the room. A built in 60 db siren can be used if the sensor is in security application mode. A built in light sensor can be used to detect ambient light.

The device needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behavior a static controller such as a PC with home automation software or a gateway is required.

Z-Wave Presence Detector

ZWevrHSP02

Temperature/Humidity Detector

ZWevrST814

The ST814 is a combined Temperature/Humidity Sensor which is designed for both desktop use and wall mountable. The device has a local LCD display which either shows the temperature or the humidity. 4 buttons allow switching between minimum, maximum or actual values, humidity versus temperature and Fahrenheit versus Celsius The device can report its values via Z-Wave and allows to set trigger level for direct control of other Z-Wave device when the measured value hits the trigger point. This makes the ST814 a very powerful and flexible tool to measure environmental values and control device within a Z-Wave network.

Socket module - French plug

ZWevrAN1576

This device is a switch plug-in and is used between a standard Schuko wall outlet and lamps connected to a wall outlet by cable.
The unit is rated IP 20 and can therefore be used in dry environments only.
The unit is included into a Z-Wave network by a remote control, PC software or any other kind of Z-Wave controller. It switches all kinds of loads. Local operation is possible by pressing the button on the device.

Door/Window Sensor

ZWVIS ZD2102-5

Zipato’s Door/Window Sensor consists of sensor and a magnet. One piece mounts on the door/window frame, and the other mounts on the door/window itself. When the two components separate, sensor reports that door/window is open. When used with Zipato home automation controllers it can be part of any automation scenario created using Zipato Rule Creator. It can be used either to detect intruders or to automatically trigger other Z-Wave devices when activated Like all Z-Wave devices displaying the Z-Wave logo, Zipato Door/Window Sensor can also be used with various Z-Wave networks and controllers, regardless of the manufacturer.

Z-Wave USB Stick

ZWvisZU1401

he Vision USB-Stick is a Z-Wave USB dongle. When attached to a host processor, it becomes a Z-Wave communication device, which exposes the Zensys API (SerialAPI) through integrated USB. The primary function of the device is to allow a host processor to control up to 232 Z-Wave devices using the Z-Wave technology protocol. Within the Z-Wave wireless network the Z-Stick acts as a static controller with enhanced (SUC/SIS) network management function. In order to use the full functionality a software application such as Z-Cloud or Z-Way is needed to run on the host. Z-Stick supports all kinds of third party software complying with the Zensys Serial API.

Hank RGBW LED Bulb

ZWHNK RGB01

Bring color into your life and create a personal comfortable atmosphere with dimmable white and color shades. The Hank RGB LED bulb fits into every E27 bulb holder and can be connects to a smart home center through Z-Wave wireless technology right after screwing in. The required radio chip is already integrated into the bulb’s housing. Via remote control, smartphone or tablet you can vary brightness and light color as well. Daylight, candle light or party atmosphere: As of now you can define light atmosphere according to your wishes or use scenes (e.g. in case of an alarm) activating appropriate light color.

As a special function, the Hank bulb light color can be completely adjusted without using a smartphone app. Just control it over the existing wall switch. Through the combination of ON/OFF at the wall switch, the bulb will go into a fade mode and fades through all main colors. Once you have found the color you like, you select it by switching ON/OFF the bulb again. Then the fade mode will stop and the bulb will stay in the current color mode.

Due to LED technology, power consumption is very low compared to conventional bulbs. The Hank bulb is as bright as a conventional 60W bulb, but needs only 7W.

KEYFOB-C mini 4 Button Remote Control

ZWPOPE009204

You want to be in control of your smart home? With the KFOB-C remote control you can switch the lights, the heating and window blinds with only one touch of a button. Using the KFOB-C remote control is as simple as using your car key remote control – and it is equally small and compact and suits to your key ring. Furthermore the robust sliding cover prevents involuntary touches of the buttons.
The KFOB-C remote control could be used as primary controller and secondary controller as well. With the buttons 3 and 4 new Z-Wave devices can be added to the KFOB Controller. Equally you can remove devices from your Z-Wave network.
Due to primary controller function you can use the KFOB as standalone remote control as well without using any smart home gateway. Devices such as sockets, window blinds, dimmer, lights and electronic door locks can be switched by KFOB-C directly.
Once one device is added to KFOB remote control it checks the device type (switch, dimmer,…) and assigns the buttons with correct commands.
Of course you can also include the KFOB-C to an existing Z-Wave smart home network. Therewith you have the possibility to trigger predefined scenes such as the opening of the garage door with simultaneous switching of all lights in your garden by only one touch of a button. Or start the scenario “Good night” which switches off al lights and electrical devices in your house with only one touch of a button when you go to bed.