Heatit

With the optional usable cable you can update Heat-it thermostats' software and firmware.

The Floor Sensor is ideal suited to measure soil temperature – especially when using a floor heating – and reporting to the Heat-it thermostat. Therefor the sensor can be laid in empty conduits and set into the ground.

NTC 10 kOhm @ 25°C
Cable length: 3 meters

Heatit Z-DIN 616 is a 6 x 16A potential free relays for DIN rail mounting. The module is equipped with 6 relay switches and 6 digital inputs for mounting on a standard M36 DIN rail (EN50022).

The 6 independent relay switches of the Heatit Z-DIN 616 can be freely controlled from the Z-Wave network and be used for many different purposes. All 6 relay switches are galvanically isolated from each other and may be used for controlling AC and/or DC loads. Each relay switch is rated for loads of up to a maximum of 16A.

The 6 digital inputs can be connected to dry contacts, e.g. limit switches, door/window contacts, or push-buttons. Another option is to connect them to open-collector outputs from discrete sensors, e.g. PIR sensors. The 6 inputs of the Heatit Z-DIN 616 may also function as a scene controller and activate predefined scenes in other Z-Wave devices or controllers (by transmitting Central Scene notifications).

The Heatit Z-DIN 616 is powered by a 10 – 24Vdc power supply. Initiation of Z-Wave inclusion and exclusion is executed by activating a push-button through a little hole in the front of the module. The Heatit Z-DIN 616 is equipped with a LED in the front of the module for different kinds of status indications.

Heatit Z-Relay multipurpose relay module can be used for many different applications. The IP 55 rated casing makes it useful for any outdoor application. Can pull loads up to 16A and 25A. The relay has three inputs: analog or digital. You can use both analog and digital inputs, or a combination.

Heatit Z-Relay is a multipurpose product and can be used for the following applications:
• Boiler control
• Leakage control
• Temperature control
• Outdoor applications
The relay has 3 analog/digital inputs and can be used with a lot of different sensors and meters, from water meter pulse sensors to NTC temperature sensors.
The relay comes in two different versions, 16A and 25A. They both have firmware updates (OTA), power metering and S2 security.
We are able to make special firmware if a customer has a special requirement.

Heatit Z-Water is a DIN-rail regulator for controlling hydronic heating. The module clips right onto a DIN-rail to add a variety of functions to your wireless Z-Wave network. Heatit Z-Water is equipped with 10 relay outputs and it has 4 analog/digital inputs. The module is power supplied from a 230V AC mains connection and is able to deliver an output supply of 24V DC or 230V.

Heatit Z-Water relay outputs may be freely controlled from the Z-Wave network, and may be used for several purposes, e.g. on/ off control of lights, controlling valve actuators in an underfloor heating system, or controlling other home automation systems.

Heatit Z-Water analog/digital inputs (different firmware versions) may be configured to work with different functionalities. They may be connected to potential free contacts, opencollector outputs, and may also control other Z-Wave devices; switches, dimmers, etc. Furthermore, the inputs may be used as scene controllers and send central scene notifications to the Z-Wave primary controller (via digital inputs only).

Heatit Z-TRM3 is an electronic thermostat for electrical floor heating, designed to be mounted in a standard flush box. The thermostat has a built-in Z-Wave chip that can be connected with Home Automation systems. Heatit Z-TRM3 has SmartStart. This feature allows the user to include all devices with SmartStart by scanning the QR codes on the devices. On startup all the devices will automatically be included in the gateway (requires SmartStart compability). This saves the installer a lot of work.

Art. 54 305 99