CentralCasa. DI-O

On/Off built-in lighting module

54855

Wireless control your light and create easy light ambience in your living room... With this module, you can easily control your smart light system with a wireless wall switch or remote control. Add the DiO HomeBox and you will also be able to control it with your smartphone, create life scenarios and enjoy an easy smart light control. CONTENT 1 on/off built-in module for lighting (1000W). INSTALLATION The module can easily be installed behind your lamp to control it remotely with wireless wall switch or remote control. I can also pair it with my DiO HomeBox to control my smart lights from my smartphone, anywhere, anytime.

1 Channel Remote Control

54791

This remote lets you control any DI-O wireless receiver. It has a range of up to 30 meters in open field. It allows the controlling of just one receiver at each time.

3 Channel Remote Control

54760

Wireless remote control with 3 channels, that allows the control of until 3 DI-O wireless receivers.

3500W Actuator module (for sockets)

54790

Put this receiver and control where you want this to any issuer DIO. Ideal to put inside your sockets and control them wirelessly.

3500W Actuator module with timer

54789

Control this module with any DIO emitter and temporize if you wish.

433MHz RF Repeater

54799

This module will receive data and retransmit them. Its range is 50 meters in open field, which may reduce between divisions depending on the thickness and material of the walls. It is necessary to pay special attention to the situations when the controller still reach the receiver, because it can cause receive the orders twice, one from the controller and another from the repeater.

Appliance Module 3500W (E plug)

54785

This module is a wireless receiver and can be controlled by any wireless controller from DI-O. The module will operate ON/OFF electrical loads with up to 3500W.

Classic Double wireless Switch

54502

classic double switch. This wireless switch allows the control of any DI-O receiver. It as 2 keys that allows the control of two different receivers.

DC Emitter Micromodule

54700

This module lets you transform a wired switch, into a wireless one. Use the old connections of the switch and connect it to the micromodule, it will send the information to any DI-O wireless receiver. It is even possible to change the location of the switch.

Dimmable CFL Lamp with receiver

54772

This CFL dimmable lamp, has a built-in receiver from DI-O, which will allow to be controlled by up to 6 DI-O controllers. Can be paired with a switch, a motion or twilight sensor, etc.

Dimmer and On/Off Micromodule

54514

It is a universal regulator Micromodule, which will control onee light circuit. Can be controlled locally by wired switch, or remotely by a wireless controller di-O.

Dimmer Outlet Module with 300W (E plug)

54786

This module is a wireless receptor and can be controlled by any wireless controller DI-O. The module will regulate the light intensity of the electrical loads connected to it with a capacity of 300W.

Dimmer Outlet Module with 300W (F plug)

54788

This module is a wireless receptor and can be controlled by any wireless controller DI-O. The module will regulate the light intensity of the electrical loads connected to it with a capacity of 300W.

DIO2 Heater module with status feedback

ED-TH-02

Linked to the HomeBox DiO the module connected heating with status feed-allows me to remotely control my heating and to plan the programming in a rapid and convivial manner.

Thanks to the feature 'state feedback', I know, at any time, the state of my heating (on / off / ° C).

DIO2 keyfob 2 or 4 channels

ED-RC-02

With the DiO wireless wall switch, you can easily play your life scenarios but also control your lightings and/or rolling shutters one by one or all together.

For example, with one single clic on the switch next the entry door, I launch my "Leave home" scenario and my house automatically moves into "ECO" mode: lights turn off, shutters close down and heating moves into ECO mode.

DIO2 Shutter module with status feedback

ED-SH-01

Connected to the HomeBox DiO, it allows you control shutters individually, centrally or automatically with time programming or script mode. At any time, You can see those who are opened or closed.

DIO2 Smart Flush-Mounted Lighting Micromodule

ED-LI-02

With this intelligent high-performance lighting solution (150m free field between the module and the device), you can easily control the lights throughout your house, wherever you are in your home, without having to modify your home’s electrical system.

DIO2 Wireless Opening Detector with State Feedback (open/closed)

ED-SE-02

You can connect your sensor to a DiO 868 MHz receiver or yor HomeBox DiO and create an ignition or an automatic extinction of your lamps.

DIO2 Wireless Presence Detector

ED_SE-01

Turns lights on when it sees a presence in the room.

You can connect your sensor to a DiO 868 MHz receiver or to HomeBox DiO and program the automatic extinction of your lights when the room is unoccupied.

DIO2 Wireless Temperature Sensor with Status Feedback

ED-SE-03

With its sober and miniaturized design, you install the wireless temperature sensor wherever you want in your house to get an optimized temperature regulation.

You can also place temperature sensors in different rooms in your house to check their temperature from your smartphone.

DIO2 Wireless wall switch (Black)

ED-SW-02

With the DiO wireless wall switch, you can easily play your life scenarios but also control your lightings and/or rolling shutters one by one or all together.

For example, with one single clic on the switch next the entry door, I launch my "Leave home" scenario and my house automatically moves into "ECO" mode: lights turn off, shutters close down and heating moves into ECO mode.

DIO2 Wireless wall switch (White)

ED-SW-01

With the DiO wireless wall switch, you can easily play your life scenarios but also control your lightings and/or rolling shutters one by one or all together.

For example, with one single clic on the switch next the entry door, I launch my "Leave home" scenario and my house automatically moves into "ECO" mode: lights turn off, shutters close down and heating moves into ECO mode.

DIO2 Wireless wall switch Smiley

ED-RC-01

With the DiO wireless wall switch, you can easily play your life scenarios but also control your lightings and/or rolling shutters one by one or all together.

For example, with one single clic on the switch next the entry door, I launch my "Leave home" scenario and my house automatically moves into "ECO" mode: lights turn off, shutters close down and heating moves into ECO mode.

Four Buttons Keyfob

FO_3002

Keyfob with four buttons with action confirmation by led.
The functions associated to this keyfob are: disarm, total arm, partial arm and duress alarm.

Gray Double Paddle

54728

Gray double paddle for DI-O switch.

Gray Simple Paddle

54718

Gray simple paddle, for DI-O switches.

Internal Wireless Motion Detector

54703

A wireless motion sensor for inside use. It can be applied in many situations, for example, in the entry hall or in the bedrooms hall. The detector detects the movement and sends the information to any DI-O receiver.

Internal Wireless Motion Detector "classic"

54503

A wireless motion sensor for inside use. It can be applied in many situations, for example, in the entry hall or in the bedrooms hall. The detector detects the movement and sends the information to any DI-O receiver.

Interrutor "Classic" with timer

54716

Wireless DI-O Switch.
The timer allows this emitter, after sending the "ON", wait periods between 3s to 10m to send the "OFF".
You can control up to 6 different DI-O actuators.
Line "Classic".

Kit LED Lamp + Magnetic Contact

54792

This kit is useful for applications in front doors, cabinets, etc. Its operation is simple, when the magnetic contact is broken, a command is sent to the LED lamp that will be actuated. The lamp has a built in switch and may act as bedside lamp. It is possible to control the light through any DI-O controller.

Lamp Module E27 with 100W

54778

This lamp module can be applied in any E27 socket. Being a receiver module, any lamp that is threaded into it, will be actuated. The control is performed wirelessly via any DI-O controller.

LED Lamp

54793

This is a LED lamp with three modes of light intensity. The lamp has a built in switch and may act as bedside lamp. It is possible to control the light with any DI-O controller.

Magnetic contact

54784

The magnetic contact can be placed on doors or windows, it can be used for various purposes. Functioning as emitter, when the contact is broken, for example, a window or a door is opened, the signal is transmitted to the wireless receiver, which may be a lamp or other wireless receiver from DI-O.

Outdoor Socket Module with 3500W (E Plug)

54746

Module made for outdoor use with a capacity of up to 3500W. Has a robust construction that allows its use outside the house. It’s ideal for powering electrical appliances frequently used abroad, or to be placed in areas prone to moisture.

Outdoor Socket Module with 3500W (F plug)

54747

Module made for outdoor use with a capacity of up to 3500W. Has a robust construction that allows its use outside the house. It’s ideal for powering electrical appliances frequently used abroad, or to be placed in areas prone to moisture.

Outdoor Wireless siren

TA_4004

104dB wireless external siren with built-in strobe.
Arming/disarming confirmation
Built-in tamper protection.

Pack DC module emitter + Dimmer actuator module 30-230W

54737

This pack lets you turn a wired switch into a wireless controller, to control a lighting circuit. The transmitter module connected to the wired switch will send the orders to the module. There is the possibility to add up to six DI-O wireless controllers, which will control the module.

Pack 1 Channel Remote + LED Lamp

54794

This pack is very functional, through the mini command, it is possible to remotely control the LED lamp. The lamp has a built in switch and may act as bedside lamp. It is possible to control the light through any DI-O controller.

Pack 3 Shutter/Blinds modules 500W

54751

This module allows the shutter control to 500W. You can control locally through the switch, or wireless via a command or wireless switch. The module can be used for the control of blinds or even lighting.

Pack ON/OFF Micromodule 30-230W + 3 Channels Remote Control

54759

This pack allows the On/Off of the illumination that is being controlled by the micromodule. The switching can be performed locally by the switch or remotely with the Remote Control provided in the pack. The Remote also allows controlling over two receivers present in housing.

Pack remote control with 3 channels + 3 Appliance Modules 2300W (E plug)

54795

This kit allows remote control of three outlet modules with capacity to 2300W, via the wireless controller. You can control three outlets, the control can be made by the remote control present in this kit, or using any wireless controller from DI-O.

Pack Simple Switch + Actuator 1000W

54735

This kit allows the control of loads up to 1000W, for example lamps and electric appliances. The control is done via the simple wall switch. This set is wireless, and is easy to install and configure.

Pack with 3 Chanel Remote + 3 1000W Actuator Modules

54797

This kit allows remote control of three outlet modules with capacity to 1000W, via the wireless controller. You can control three modules, the control can be made by the remote control present in this kit, or using any wireless controller from DI-O.

Pack with 3500W 3 channel actuator + Outdoor technical housing IP56

54750

The actuator module with 3 channels can be actuated by any wireless controller DI-O. With its three channels, can control up to three outputs and has capacity for 3500W. It has a technical box which allows the outdoor usage.

Frequency : 433,92 MHz

Pack with Remote Control + 500W Shutter/Blind micromodule

54753

This kit allows wireless control of the shutter/blinds with power up to 500W. Installing the micromodule to control the engine and connected to a switch, the shutter/blinds can be controlled locally by the switch, or wirelessly through a mini remote with 1 channel. In addition to controlling the shutter, the micromodule can also be used to control an illumination circuit. The receiver is compatible with the DI-O transmitters such as remotes or switches.

Programmable Remote Control

54771

The wireless programmable controller is quite complete, allowing several features not found in other DI-O remote controllers. It has an LCD screen that lets you view the required information.

It allows among other features:
- Adjustments of memory;
- Display of hours;
- Schedule time activation ON / OFF;
- Timer;
- Indication of signal transmission;
- Indication of code;
- Indication of battery status;

Shutter/Blinds micromodule 500W

54754

This micromodule allows the shutter control to 500W. You can control locally through the switch, or wireless via a command or wireless switch. The micromódulo can be used for the control of blinds or even lighting.