Eldes EPIR

This kit adds the indoor wireless siren EWS1 to the security sensor EPIRw.
In case of alarm the system can send warnings via SMS or voice call and warn the people around with the siren.

Indoor wireless sirens EWS1 is a wireless device with integrated siren speakers which are used for operating ELDES wireless security systems. Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software "ELDES Configuration Tool“). Connected devices are recognized as central security system devices and can be controlled via system phone number. The system adds one wireless zone and one wireless output. Wireless zone is used to monitor device and wireless output is used to control the speaker. When the system is violated, the siren alarms for one minute. It is possible to connect up to 16 wireless devices to the central security system at a time.

Magnetic door contact with panic button EWD1 is a wireless device with magnetic contact which are used to secure doors, windows or any other opening parts and operating with ELDES wireless security systems. Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“). When EWD1 is connected to the system, two wireless zones are added. First wireless zone is used to monitor the magnetic contacts and the second wireless zone is for managing the panic button. By default panic button zone is configured as Silent zone and in case of violation, system will cause an alarm to administrator numbers or/and to monitoring station without turning the siren on. It is possible to connect up to 16 wireless devices to the central security system at a time. Maximum distance for wireless connection is 150 meters (in open areas).

Outdoor wireless siren EWS2 is external power supplied siren with integrated wireless module EW1. This wireless module EW1 connects to ELDES wireless security systems and managing EWS2 siren to work with the system. Users have to bind it to the central device of security system (by sending a corresponding command via SMS message or using software „ELDES Configuration Tool“) and configure input zones and outputs. Connected devices are recognized as central security system devices and can be controlled via system phone number. The siren has integrated battery and in case of power supply failure, it starts alarming. When the system is violated, the siren alarms for one minute. EW1 module also has one unused zone and one unused output. They can be used to connect variuos additional devices such as motion sensors, smoke detectors and etc (see wireless expansion module EW1 manual).

PIR sensor EWP1 is a wireless device with integrated motion detector for use as part of the ELDES wireless security system. The sensor allow expanding security zones administrated by the systems up to 16 additional zones and also the installation is comfortable and simple as it does not require any wired connections between the system devices. The user only needs to turn on the required number of PIR sensors EWP1 and connect them to the control panel, either by sending a command via SMS message or using the ELDES Configuration Tool software.

EPIR is a security alarm system that works with GSM network.

Alarm system ELDES EPIR supports CONTACT ID protocol which is required to transmit signals to Monitoring station.

ELDES EPIR868 (ELDES EPIR version with installed 868 MHz radio transmitter-receiver) can operate as an access point for wireless ELDES devices.

EPIR is a security alarm system that works with GSM network.