Jablotron 60 Series

Corridor lens for Jablotron's motion detectors. Compatible with JS-10, JS-20, JS-25, JA-60P, JA-80P, JA-80PB, JA-84P e JA-83P.

Drill-in magnetic detector , NC contact with wires. Color Brown.

The JA-60IR optical infrared barrier is designed to protect areas such as doors, windows, balconies etc. within a range of 5 meters.

The RC-86 is designed to remotely control setting/unsetting, trigger panic alarms, and control other appliances. The big advantage is the possibility of configuring it to 433 MHz (JA-60 systems, UC-216, UC-222 receivers etc). The keyfob indicates its flat battery.

The OS-366A is an hardwired outdoor backup siren combining a loud acoustic siren with a flashing light. The high-powered flashing light helps to locate the active siren

The JA-60B is a modern wireless glass break detector that provides easy and reliable protection against robbery.

The JA-63F keypad is designed to control and program alarm systems of Jablotron’s JA-60 series.

This siren was designed and made in Portugal.

It has been designed for exterior use. Get is power trough the alarm central and a backup battery incorporated.

Have a tamper that originates an alarm in case of cover violation.

The JA-60P is an intruder detector designed to detect human body movement in a protected area.

(Used unit, refurbished as new)

The detector provides an analysis of environmental conditions through the entire movement speed frequency spectrum, allowing focus on intruders and eliminating environmental factors of false alarms. The spectrum analysis is embedded in the VLSI based electronics of the detector assuring high reliability and trouble free operation.
As the LC-104-PIMW-W is a combined technology (PIR & microwave) an alarm signal relay activation occurs only when signals from both sensors (PIR & MW) are present at the same time. The effective detection range is the range of which the patterns (PIR & MW) are intersected. The GAIN potentiometer adjustment changes the MW signal intensity so that the effective pattern will be scaled.

This type of acustic indicator is 12VDC powwered and can be used as a powerful indoor siren.

The JA-60G detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc).

The JA-65X digital communicator is designed for JA-63 and JA-65 alarm control panels. If the 65X module is installed, the control panel can communicate with a Monitoring Station, send voice messages, SMS messages and dial a numeric Pager as well as communicate with a remote PC. A standard analog telephone line (type TNV 1-3) must be connected to the module for these functions.

The JA-60V is an outdoor intruder detector designed to detect human body movement in a protected area.

The detector indicates room water floods (e.g. cellars, bathrooms). This information is sent to an alarm system for alert message transmission. It is connectible to an Oasis alarm system via a JA-81M wireless detector. Plug it into the IN1 input terminal (red wire) and GND (black wire). If the detector is triggered (e.g. by a water), it sends a trigger signal. If the detector goes into a stand-by condition, it sends a non-triggered signal. The LD-81 takes its power supply from the JA-81M´s circuit.
It is possible to use the LD-81 with an older type of detector, the JA-60N, for Profi systems if you insert a 4k7 resistor in series with the LD-81 between the INP (red wire) input terminals and GND (black wire).

The JS-25 COMBO is an outstanding "two in one" detector, which dramatically simplifies alarm installations.. This detector combines two sensors (P.I.R. motion & acoustic glass break) in one housing.

The JA-88P wireless PIR detector is designed to indicate disturbance outside the building caused by human bodies. It is a two-zone outdoor detector by Optex supplemented with a transmitter compatible with JA-80 OASiS systems. Both the detector and the transmitter are powered by three lithium batteries. Both devices have a common power supply and the low battery signal is transmitted to an ESS control panel as a standard. The detector is equipped with two TAMPER contacts (front and rear), which immediately report opening of the detector cover or its possible tearing from the place of installation. The detector regularly performs automatic tests and reports its status via control transmissions to the system.

The JA-68 is a universal output module designed for use within Jablotron systems of the JA-80 OASiS, JA-63 Profi and JA-65 Maestro series. The module provides eight factory reprogrammed semiconductor outputs and a switch-over relay output. The relay can be configured using 10 DIP switches which allows for multiple function assignment. There is no limit in the number of JA-68 modules used in the system. There is no limit to the number of JA-68 modules used in the system and the JA-68 module can be combined with GSM, LAN or PSTN (landline) communicators.
The module is designed for being placed into the control panel housing.

4,8V 1800mAh rechargeable NiCd battery to be used with the OS-36x wired sirens.

This P.I.R. motion detector is used to protect interiors. It detects any movement of objects with a temperature close to that of the human body.

Module of 8 wired inputs for JA-65K control panels.

The detector indicates fire hazards using the built-in LED indicator and alarm outputs ALARM and TAMPER. These outputs must be connected to control panels complying with EN 50131-3.
The SD-282 ST consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works on the principle of scattered light and is very sensitive to dust particles which are present in smoke. There is also a built-in heat detector for detecting fire which generates heat quickly with a small amount of smoke. The microprocessor performs digital analysis for a high false-alarm immunity.

The JA-60WEB communicator is designed for JA-63 and JA-65 alarm control panels. The dialer is used for communication with a central monitoring station via an Ethernet network / the internet.

Jablotron JA-8X and JA-6X series control panels can be connected to a computer via the JA-80T interface cable. Connect the control panel’s external digital bus connector to the JA-80T interface input using a cable with suitable RJ connectors. Then plug the JA-80T’s USB plug into a free USB port on your PC. The correct drivers must be installed in to the computer to use the JA-80T. Once installed you can start using ComLink software - using this software the user/installer can easily program, operate, and test the system, read the latest events and much more.

The UC-280 is an 8-zone interface linking JA-60 wireless detectors with hard-wired security control panels.

The Next Duo is a Dual Technology Digital Detector designed to prevent false alarms due to interferences in residential and light commercial environments. A passive infrared (PIR) sensor and a complementary active microwave sensor are combined in a single unit, giving Next Duo an unprecedented capacity to distinguish between the motion of a human body and any other disturbance.

External antenna for the wireless equipment series Jablotron JA-60.

Magnetic door sensor Normaly closed contact

The MT-77 Piccolo terminal is a communication accessory for Jablotron home system. It should be connected to JA-6x control panel equipped with GSM communicator.

The GBS-210 glass break detector detects the breaking of glass windows.

Maintenance-free rechargeable lead-calcium batteries with 6V voltage and 1,3Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.

The detector is intended to detect human body movement in buildings. Using two sensors ensures better immunity against triggering by moving pets.
The signal is processed by a multiple signal analysis method which guarantees excellent sensitivity and a high resistance to false alarms. Detection analysis can be adjusted to increase its immunity (if installed in a problematic location). The detector distinguishes itself with excellent immunity against high frequency interference and other false signals. It can be installed on a flat wall or in a corner.

37cm antenna with magnetic base for Jablotron JA-60GSM dialer.

The GS-133 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, etc). The detector detects two levels of gas concentration - with corresponding output reactions.
The main GS-133 features are: high reliability and sensitivity, compact size and long stability & lifetime.

External antenna for the wireless equipment series Jablotron JA-60.

Magnetic door sensor Normaly closed contact

Maintenance-free rechargeable lead-calcium batteries with 12V voltage and 2,2Ah capacity. This type of battery has a long lifetime and do not need any other care other than charging.

Backup battery for the JA63Kxx security systems.

Curtain lens for Jablotron's motion detectors. Compatible with JS-10, JS-20, JS-25, JA-60P, JA-80P, JA-80PB, JA-84P e JA-83P.