Wireless Detectors

The Next+ PIR MCW PowerCode™ wireless digital PIR detector represents the next generation of digital wireless detectors. A fully supervised wireless detector with anti-collision PowerCode™ technology, Next+ PIR MCW is compatible with all PowerMax™ and all Visonic PowerCode™ wireless panels and receivers.
Next+ PIR MCW implements industry-leading patented technologies including FM Digital Signal Processing (FM-DSP), "True Motion Recognition"™ with Fuzzy Logic algorithm (TMR™), and state of the art 3D cylindrical optics.
The result is the industry's best detection accuracy, false alarm immunity and ultimate long term reliability – in an attractive, easily installed wireless detector designed for any home or office environment.

MCT-426 is a fully supervised wireless photoelectric smoke detector that is compatible with PowerMax® and other Visonic PowerCode™ wireless home security systems. Designed for a wide range of residential and commercial applications, the easily installed MCT-426 has a streamlined design and a longer battery life for easy and low-cost maintenance.

Achieving superior smoke detection sensitivity levels, the MCT-426 provides early warning of developing fire. When smoke is detected, MCT-426 issues both sound and transmitted alarms. To ensure secure communication, transmissions use a PowerCode 24-bit ID command code, which is selected from 16 million possible combinations and is therefore unique and virtually impossible to accidentally reproduce. A smart anti-collision algorithm prevents signal jamming by simultaneous transmissions from multiple devices.

MCT-426 also transmits supervisory reports, including battery condition, to the wireless control panel, or receiver, at regular intervals – ensuring system integrity and functionality at all times.
Available in various frequency bands according to international standards, MCT-426 complies with strict international certifications for safety products in Europe.

The Next+ K9-85 MCW is a PowerCode™ wireless digital PIR detector designed to enable homeowners to secure their homes while allowing their pets to move freely anywhere in the house. Employing Visonic's patented "Target Specific Imaging" optical system (TSI™) and unique pet identification software algorithm, the Next+ K9-85 has an unprecedented capacity to reliably distinguish between human bodies and pets weighing up to 38 kg (85lb).

Clip MCW is the industry's smallest and most elegant wireless curtain-type PIR detector designed for the protection of doors, windows and all-glass walls. This fully-supervised detector featuring anti-collision PowerCode™ technology is compatible with the PowerMax® wireless family and other Visonic PowerCode™ wireless receivers.
Clip MCW creates a protective curtain enabling complete coverage for properties with large or subdivided windows, doors and all-glass walls. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm.
Clip MCW uses advanced patented digital FM signal processing, as well as the well-known patented TMR™ algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit's specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms.

The MCT-302 is a fully supervised PowerCode™ magnetic contact transmitter, designed primarily for protecting doors and windows using a built-in magnetic contact that operates in conjunction with a magnet to detect the opening and closure of a door or window. This highly reliable top-performance wireless device is easy to install and operate in a wide range of residential and commercial environments.

The MCT-501 is a fully supervised digital glass-break wireless detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed for a wide range of residential and commercial applications where reliable glass-break detection is required.
The MCT-501 employs an advanced patented acoustic pattern recognition technology that can reliably distinguish between true alarms and false alarms. It provides 360o detection range of up to 6m (20 ft) and can detect breaking of different types of glass including plate, tampered, laminated and wired.

The MCT-441 are fully supervised indoor, easy-to-install, PowerCode Gas detectors. The MCT-441 is a natural gas detector designed to send an alarm when Methane gas is detected. The detectors can be used in a house, apartment, caravan, mobile home or yacht.
The detectors are powered by 220 VAC. An internal Lithium battery is used for AC power failure reporting only (the battery does not power the detector).
The detector can send the following messages to the alarm system control panel: Gas alarm, gas sensor failure , AC power failure and low battery voltage.
The MCT-441 is designed for wall mounting and should be placed in a location where gas presence, for example leakage, is probable.
Upon gas detection, an audible buzzer is sounded and the built-in transmitter transmits a digital message, composed of the detector's PowerCode ID followed by status messages. Alarm and other data are thus forwarded to the alarm system. A periodic supervision message is transmitted automatically (see specifications) to inform the alarm system at regular intervals, of the unit’s active participation in the system.
The MCT-441 has a 24-bit ID code, randomly selected in the factory from over 16 million possible combinations. This code is therefore unique and virtually impossible to reproduce. Compatible PowerCode receivers are designed to "learn" specific IDs and respond only to them.

The MCT-550 is a fully supervised wireless flood detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.
In default mode, the MCT-550 transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset.

TOWER®-20AM MCW is a ground-breaking anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes, and free-roaming animals, while still providing reliable detection of real threats.
TOWER-20AM MCW features the revolutionary Octa-Quad™ technology, which uses eight PIR sensors (compared to only one used in other outdoor detectors), with each sensor acting as a Quad detector, to accurately determine whether an alarm is justified. In addition, further increasing its reliability, TOWER-20AM MCW also has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation to provide exceptionally high resistance to vandalism and masking.