The JA-81F is a component of Jablotron’s OASiS alarm system and is designed tocontrol and program the system. It has a built-in proximity access card reader andallows the wiring up of a separate door detector. The battery-powered keypad communicates wirelessly using OASiS protocol.
The JA-81M is a component of Jablotron’s Oasis 80 alarm system. It is designed to detect the opening of doors, windows etc. It can also be extended by a normally closed / normally open sensor. It is also designed to detect the handling of roller blinds. This is achieved by detecting ratchet-wheel movements. Small movements are filtered out so that wind blasts do not cause false alarms. The battery-powered detector communicates via OASIS radio protocol.
The JA-81E is a component of Jablotron’s OASiS alarm system and is designed to control and program the system. It has a built-in proximity access card reader and allows the wiring up of a separate door detector. The keypad should be wired to the control panel.
The JA-81F is a component of Jablotron’s OASiS alarm system and is designed to control and program the system. The display backlight colour can be set according to your needs. It has a built-in proximity access card reader and allows the wiring up of a separate door detector. The battery-powered keypad communicates wirelessly using OASiS protocol.
The JA-80PB consists of two independent detectors which occupy two separate enrollment addresses in the control panel. The motion detector uses a PIR sensor. The glass-break detector uses the analysis of air pressure variations combined with the characteristic sound of glass breaking. The product is designed for internal use in buildings. The battery-powered detector communicates via OASIS radio protocol.
The JA-89P is an outdoor intruder detector designed to detect human body movement in a protected area. It supplements a double-zone PIR sensor produced by Optex with a Jablotron transmitter enabling the sensor to be used within JA-80 OASiS systems.