Jablotron Oásis Series

Jablotron JA-8X and JA-6X series control panels can be connected to a computer via the JA-80T interface cable. Connect the control panel’s external digital bus connector to the JA-80T interface input using a cable with suitable RJ connectors. Then plug the JA-80T’s USB plug into a free USB port on your PC. The correct drivers must be installed in to the computer to use the JA-80T. Once installed you can start using ComLink software - using this software the user/installer can easily program, operate, and test the system, read the latest events and much more.

The JA-80G detects mixtures of air and combustible gases or fumes (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different reactions. The mains-powered detector indicates a gas leakage optically, and acoustically, and transmits alarm wirelessly via Oasis protocol.

The JS-25 COMBO is an outstanding "two in one" detector, which dramatically simplifies alarm installations.. This detector combines two sensors (P.I.R. motion & acoustic glass break) in one housing.

The JA-81E is a component of Jablotron’s OASiS alarm system and is designed to control and program the system. It has a built-in proximity access card reader and allows the wiring up of a separate door detector. The keypad should be wired to the control panel.

The JA-82KRC is a configuration of the JA-82K control panel that includes the JA-82R wireless communications module and the JA-82C wired inputs module. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.

The JA-83M is a component of Jablotron’s Oasis alarm system. It is designed to detect the opening of doors, windows etc. The battery-powered detector communicates via OASiS radio protocol.

The UC-82 is powered by an external 12V DC power supply and it provides 2 relays which can be controlled by radio signals and offers the following:

• Remotely controllable relay outputs which follow JA-80 control panel programmable PG outputs;
• Remote control of appliances using RC-8x controllers;
• Relay output of JA-8x wireless detectors;

The Next Duo is a Dual Technology Digital Detector designed to prevent false alarms due to interferences in residential and light commercial environments. A passive infrared (PIR) sensor and a complementary active microwave sensor are combined in a single unit, giving Next Duo an unprecedented capacity to distinguish between the motion of a human body and any other disturbance.

The JA-82KR is a configuration of the JA-82K control panel with the JA-82R wireless communications module. The JA 82K main board provides building-block-like modularity which allows functional extensions to be made by simply plugging-in the required modules.