Single Button Wall Lamp Switch Module (2 wires)

Normal Wall switch operation or remote control using any X10 compatible r.f., infra-red, desktop or PC controllers.
Create multiple scenes controls.
Can be controlled by event triggering e.g. motion detection, etc.

Availability: 2 in stock

Manufacturer: X10

SKU: S2222

Ship to

Shipping Method

Name

Estimated Delivery

Price

No shipping options

Overview
Reviews
Contact Us

Features: Local and remote control for incandescent lamps.
LED back light night switch indicator
Easy electronic codes setup - within 6 seconds.
Can be controlled using wall switches,or X10 compatible desk-top, wireless infra-red or r.f. handheld controllers. Can even be remotely controlled using phone or PC.
Respond to X10 All Lights ON/All Units OFF command and Bright/Dim commands
Support 2-wires wall connections i.e. no neutral wire required.
Compatible with any X10 remotes, desktops, telephone and PC controllers.
Requires signals to be greater than >100mV and 40W Loads.Application: Operate manually like a normal switch, i.e. tap top for ‘ON’ and hold to brighten or tap bottom for ‘Off’ and hold to dim.
Can be remotely controlled using any X10 compatible transmitter.
Accept ‘On/Off’, ‘All Lights On/All Units Off ‘and Bright/Dim commands. TechInfo: Voltage Rating: 230VAC+/- 10%, 50Hz
Incandescent Load: < 300W
Operating Temperature: 10~50degC
Back Size (mm): 43.25(W) x 47(H) x 18.9(D) Warning: Incandescent (2-wire) switch can only control resistive load =40W (incandescent lamp or halogen lamps, etc).
It cannot control inductive or capacitive Load (like: Fluorescent lamps?save-energy lamps etc).

Send us a message

Your name *

Your email *

Subject: *

Enquiry *

Customers who bought this item also bought

DIN rail On/Off

INS 2453-422

This module has an On/Off output and is designed to be installed in DIN rails.

This equipment is X10 compatible and is an alternative to the EOL AD10 and AD11

Micromodule On/Off

INS 2443-422

This module has an relay output and was developed to be installed behind wall switches, power outlets or installation boxes.

Lamp Module

LM12G

The Dimmer plug-in module is a 300W receiver unit that works as a remote dimmer.
The connected lamp can still be switched on and off locally. The dimmer function, however, is by an X10 remote control.
The dimmer module can be used at any wall outlet in the house with incandescent lamps between 40W and 300W. As the dimmer is simply inserted into wall outlets like an ordinary plug, there is no installation necessary. Just adjust the settings on the front side to the desired device address (e.g. F9) and note this address down in a list. The lamp connected to the dimmer module can still be controlled locally by its own switch, but do not forget to leave the local switch in the "ON" position, otherwise the lamp cannot be controlled by an X10 controller. Switch the lamp off by remote control.
The LM12E responds to STANDARD X10 protocols: "All lights on" or "All units off" from any X10 controller set to its house code, regardless of unit code. Or alternatively, by individual unit control using "On", "Off", "Bright" and "Dim".

Double Button Wall Lamp Switch (2 Wires)

S2223