Visonic Powermax Pro

Adds 8 outputs to the MCR-308 receiver. Up to 3 units can be added to each.

The MCT-550 is a fully supervised wireless flood detector compatible with PowerMax™ and other Visonic PowerCode™ wireless systems. It is designed to detect the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.
In default mode, the MCT-550 transmits each flood alert message a single time. However, users may program the detector to repeat the alert every three minutes until the device is reset.

MCR-308 is a superheterodyne receiver designed to convert a standard hard-wired control panel into a reliable fully supervised wireless system. It provides a cost-effective opportunity to realize all the benefits of Visonic wireless systems and devices.

MCR-308 is compatible with all Visonic PowerCode™ and CodeSecure™ devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices. The MCR-308 has 4 zones, each accommodating up to 4 transmitter devices. It is easily expanded using up to three MCX-8 zone expanders, for a total of 28 zones and 112 wireless devices in a single system. Dry contact outputs can be provided, using the RL-8 relay module that converts 8 open collector outputs to dry contact outputs.

MCR-308 is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control applications. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features that professionals require, including four additional outputs for low battery reporting, tamper protection, RF signal jamming and transmitter inactivity indication.

When used with CodeSecure devices, the MCR-308 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.

This highly reliable and versatile receiver is available in several optional frequencies in compliance with European, U.S. and other international standards, and is approved for use by local authorities in most countries.

TOWER®-20AM MCW is a ground-breaking anti-masking wireless mirror detector that provides unparalleled alarm detection in outdoor environments due to the unique patented technologies it employs. It is the first detector to prevent false alarms caused by outdoor interferences, such as rain, snow, lightning storms, swaying bushes, and free-roaming animals, while still providing reliable detection of real threats.
TOWER-20AM MCW features the revolutionary Octa-Quad™ technology, which uses eight PIR sensors (compared to only one used in other outdoor detectors), with each sensor acting as a Quad detector, to accurately determine whether an alarm is justified. In addition, further increasing its reliability, TOWER-20AM MCW also has a robust housing and patented anti-masking protection that can distinguish between masking spray, rain and sprinkler irrigation to provide exceptionally high resistance to vandalism and masking.

MCX-610 extends the communication range between the PowerMax® systems and other PowerCode™ transmitter, including one-way and two-way keyfobs*, remote commander and PowerCode motion detectors. It receives alarm, status and control messages from the wireless devices, and sends these messages to the control panel.

For maximum security, the MCX-610 repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations and is therefore unique and virtually impossible to accidentally reproduce.

Other important benefits of the MCX-610 include the unique anti-collision transmission sequence, which ensures accurate reception of simultaneous signals from multiple transmitters. The fully supervised repeater issues a test report on an hourly basis, indicating faults such as power failure, low battery charge and tampering.

The TOWER 40 is a microprocessor-controlled wireless digital PIR detector, designed for easy installation, free of vertical adjustment. It features parabolic and cylindrical mirrors with uniform detection sensitivity throughout its operating range, up to 18 meters (59 ft), with creep zone protection.
The advanced True Motion Recognition™ algorithm (patented) allows the TOWER 40 to distinguish between true motion of an intruder and any other disturbances which may cause false alarms.
An on-board motion event jumper determines whether 1 or 2 consecutive motion events trigger an alarm.

The MCR-304 superheterodyne receiver is designed for easy and cost-effective upgrading, enabling hard-wired control panels to operate with wireless remote devices. Compatible with all Visonic PowerCode™ and CodeSecure™ devices, the MCR-304 receiver supports up to 10 wireless devices – including hand-held and portable units, window/door transmitters and a variety of detectors and other devices. The MCR-304 is designed for wireless alarm, emergency and arm/disarm applications as well as for remote control systems and gate openers for garage and parking lots. It is easy to install and program utilizing a unique "Easy Learn" technique for transmitter enrolment. It provides all the features professionals require, including low battery reporting, tamper protection, RF signal jamming and transmitter inactivity output indication. When used with CodeSecure™ devices, the MCR-304 implements a rolling code encryption algorithm to prevent "code grabbing" by potential intruders trying to defeat the security system.

The MCT-560 is a fully supervised wireless PowerCode detector used with the PowerMax Pro (Ver. 5). The detector alerts the alarm system control panel upon detecting critical indoor or outdoor temperatures. The detector generates an alarm message when its sensor detects that the temperature has reached a certain temperature point. A restore message is generated when it crosses back the threshold temperature point. There are a total of four fixed temperature points and the user can enable one or more temperature point.
The MCT-560 can be used in instances where temperature detection is critical. Other examples of detector usage are as follows:

• Activating and deactivating pipe heaters at locations where low temperatures may causes the water in pipes to freeze.
• Warn of possible electrical device malfunction due to high or low temperature levels.
• Alerting elderly people of a significant rise or drop in room temperature.

The MCT-560 detects both indoor and outdoor temperatures. The detector monitors room temperature using an internal sensor. For outdoor or refrigerator installations, a waterproof temperature probe (optional) is used.
When the probe is connected, the temperature measurement is performed only by the probe sensor. When the probe is not connected, the temperature measurement is performed only by the detector's internal sensor.
Once the predefined temperature is reached, the detector wirelessly updates the alarm system control panel which then sends a notification to the central station or uses the PGM/X-10 controls to switch on a connected appliance, for example, a heater or air conditioner.

Replacement NiMH battery pack for the Visonic Powermax Pro security console.