Fibaro Home Center 2 is a consumer electronics device used for home automation. Home Center 2 gateway communicates with electronic sensors and devices located throughout home using wireless and wired communications and connects to central portal server using existing broadband connection (Cable or DSL).

Internal Z-Wave interface module allows user to control Z-Wave sensors, appliance controls and automation devices.

Home Center 2 integrates multiple complicated control, automation and internet protocols into one simple plug’n’play device. It provides a clear, consistent interface that allows user to manage home easily, whether at home, office or using mobile phone on the road.

The Fibaro Smoke Sensor is a universal, optical Z-Wave Plus smoke sensor. The device is battery operated (battery life of up to 3 years).

Smoke detection is signaled through siren and LED diode blinking.

The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly. Moreover the device has a built-in temperature sensor, which can also trigger the alarm once the specified temperature threshold is exceeded.

The Fibaro Smoke Sensor is designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. The smoke sensor is designed to operate in confined spaces, under normal conditions (lacking smoke, dust, condensed water vapor).

The KNX module allows the connection between the Zipato system and an KNX installation.

After connecting the module to an KNX network, ZipaBox enables their users to control their KNX devices from a remote way. Likewise allows the control from inside a KNX network devices from other technologies.

ZigBee is a low-cost, low-power, wireless mesh network standard.

The low cost allows the technology to be widely deployed in wireless control and monitoring applications. Low power-usage allows longer life with smaller batteries.

Mesh networking provides high communication reliability and more extensive range. ZigBee expansion module allowes Zipabox to communicate with all ZigBee enabled devices and integrate them into one unified home automation network.

Since majority of smart energy meters supports ZigBee, Zipabox becomes even more interested for consumers, telcos and utilities to integrate smart metering applications within connected home.

433Mhz spectrum range is traditionaly being used by many simple and cost effective wireless devices.

Long range and high reliability makes those products as the perfect choice for the cost effective security and automation applications where two-way communication is not needed. However, there is a wide vairety of different protocols available on the market and making them work all together is impossible withou a sofisticated gateway device.

By using the 433MHz expansion module, Zipabox allowing you to, not just to connect vast majojrity of the popular protocols based on 433Mhz to work together, but also, to connect them all together to work within a same network with Z-wave, Zigbee and KNX devices.

Integrate wired security sensors and accessories into your Zipato control system by adding the Zipato Zipabox Security Module. The module snaps into a Zipato expansion slot to immediately add a variety of wired inputs. Another expansion module can be snapped onto the Security Module.

Monitor the energy consumption of up to four channels with the Zipato Zipabox Power Module. This add-on module snaps into a Zipato expansion slot. Once connected, the Power Module instantaneously measures voltage, current, and power values for each channel and sends real-time data to your Zipato web portal. Using this information, you can then create energy-saving rules in the Zipato Rule Creator.

To perform the measurement is necessary to use the current clamps ZWZIP_AMPCLAMP35(purchased separately).